We now stock brand new oil pumps that have been
upgraded with our Oil Pump Upgrade Kits.
Just install and drive!
Unlike other "solutions" that only address one failure of the
oil pump, our "Oil Pump Upgrade Kit" solves both issues the M50
family of oil pumps face: The gear retaining nut backing off the
shaft, AND- sheering of the drive shaft mechanism.
Things that we have seen in an attempt to modify the OE pump
mechanism are very susceptible to human error (welding the nut on,
using wire to affix to the shaft, etc). Not only can these "fixes"
fail, but they only truly solve half the problem!
The shaft sheering is not addressed in any other fix, still leaving
this most important component vulnerable to an all too common
damage.
Please do not underestimate the
extremely common failure these engines
experience! Pump failure is just the start as the result
is very costly engine damage!
We feel that all modified street cars and of-course all vehicles
that see track use MUST have this upgrade.
| Product Style |
Intended Use |
| M50 Family |
Use with all M50 family engines, including : M50
& M50tu, M52, S50us and S52us spec engines. Direct bolt
on. |
S54 &
S50B30 /
S50B32 |
For installing a M50 family pump onto the S50 Euro
engine, or S54 engine. Commonly seen with these swaps into E36s,
E34s and E30s. |
Procedure:
-Our oil pump comes as a fully assembled direct replacement
OEM BMW pump.
-We inspect and clean each unit, hand check and confirm gear and
pressure relief valve
-Service the unit, and debur all rough edges
-Professionally fit it with our Oil Pump Upgrade Kit.
-It's ready for use when it arrives to you.
Fitment:
-M50, M52
-S50us, S52us
-S54
-S50b30 & S50B32 Euro
Price Structure:
[Upgraded Pump Components $199] +
[Labor $100] + [New OE Pump of $359]
(Send in your good used pump for a $200 credit!)
VAC Note:
We only accept late style, rebuildable M5x/S5x oil pumps for cores.
While the early pumps are quite rare these days, from time time we
do see them and they are not eligible for core credit.
Notice the tab with a bolt hole as seen in the photo below, this is
an early core...
M50 family Oil Pump: (tab denotes early model)
PLEASE NOTE: This style is not eligible as a
core.
CUSTOMER REVIEWS
There are currently no reviews of this
product.
Submit a Review
