VAC Motorsports - Forced Induction / Accessories & Electronics / All Products

AEM Boost Control Solenoid

Wed, 13 Apr 2022 08:47:09 GMT

AEM Boost Control Solenoid
Buy Now: $125.00

AEM's Boost Control Solenoid is specifically manufactured for automotive applications. It is designed to resist corrosion and sticking from exposure to rich fuel mixtures. AEM's Boost Control Solenoid is pressure tested to 100 PSI and includes 1/8" NPT to 3/16" Barb fittings to reduce any chance of leaks.

Click Here to download Installation Intsructions.

Visit Accessories & Electronics to see additional products in this category.

MISHIMOTO Titanium Turbo Blanket, BMW M340i/Z4

Thu, 23 Sep 2021 04:56:11 GMT

MISHIMOTO Titanium Turbo Blanket, BMW M340i/Z4
Buy Now: $246.95

Help reduce the heat in your 2019+ BMW M340i (G20)/Z4 (G29) (3.0L) engine bay with this Mishimoto turbo blanket.

One of the main drawbacks to a turbocharger is the massive amount of heat that it produces. That heat can severely affect intake air temperatures and rob your engine of power. Additionally, keeping the exhaust gases that spin your turbo hot makes for a more efficient, better spooling turbo. That's why it's so important to insulate the hot side of the turbocharger and keep the heat in.

With Mishimoto's 2019+ BMW M340i (G20)/Z4 (G29) (3.0L) turbo blanket, the heat stays where it's supposed to be and out of your engine bay. Our turbo blankets are constructed with an outer layer of volcanic lava rock and titanium woven fabric. The inner layer traps heat with a high-silica fabric and stainless-steel mesh for maximum durability. This allows the interior layer to withstand over 2,300°F (1,260°C) while the outer layer protects against temperatures over 1,760°F (960°C).

Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. This Mishimoto turbo blanket is a direct fit for the stock turbocharger equipped on your 2019+ BMW M340i (G20)/Z4 (G29) (3.0L) and is backed by our Mishimoto Lifetime Warranty for a lifetime of protection against engine bay heat.

Product Features:

Direct fit for 2019+ BMW M340i (G20)/Z4 (G29) 3.0L w/ stock turbo
Insulates turbo hot side to reduce engine bay temperatures and maintain turbocharger efficiency
Protects vital cooling components from excessive heat
Interior layer is rated to withstand 2,300°F
Volcanic lava rock and titanium outer layer with high-silica and stainless-steel inner layer for optimal heat protection
Stainless-steel fastening buttons resist corrosion
Includes stainless-steel wire and springs for multiple installation options
Mishimoto Lifetime Warranty

Purchase includes:

(1) Direct-fit Turbo Blanket

(2) Stainless-Steel Springs

(1) Spool Stainless-Steel Wire

(1) Note Card

Mishimoto Lifetime Warranty

Visit Accessories & Electronics to see additional products in this category.

VAC Motorsports Banjo Fitting, 14mm to -4AN

Fri, 12 Mar 2021 07:25:02 GMT

VAC Motorsports Banjo Fitting, 14mm to -4AN
Buy Now: $32.95

The easiest way to run additive lines for turbo or oil feed.

VAC Designed and Manufactured in-house banjo fitting with -4 male fitting on the end. Replace your current banjo bolt and attach the 4AN oil supply line. No drilling, no pipe threads, no leaks!

Visit Accessories & Electronics to see additional products in this category.

Rally Road Oil Distribution Gauge Block

Thu, 8 Aug 2019 12:38:49 GMT

Rally Road Oil Distribution Gauge Block
Buy Now: $69.95

This is a handy and easy way to add aftermarket oil pressure sending units to your car.

A Stainless steel banjo fitting attaches this machined block to oil pressure port on your oil filter housing. You can then attach your factory oil pressure sender to one of the M12x1.5 threaded ports. The nice thing about the banjo is that it allows you to rotate/clock the distribution block to the angle that best fits.

The gauge block also has an extra M12x1.5 port and a 1/8 npt port for additional options such as a turbo oil feed and aftermarket oil pressure senders.

We supply both M12x1.5 and 1/8 npt plugs that can be removed when you are ready to add the sender. Two new 12mm copper sealing washers are included with this part.

Contents:
1 Oil Distribution Block anodized blue
1 M12x1.5 Plug with sealing washer
1 Stainless 1/8 npt Plug
1 Stainless Banjo Bolt
2 Copper Sealing Washers

Rally Road Oil Gauge Block Applicable Engines:
M50, M52, M54
S50, S52, S54
M10, M30

BMW Models:
3 Series
E30 (84-91) > 318i
E30 (84-91) > M3
E36 (92-99) > 323is, 323i, 323ic, 325is, 325i, 325ic, 328i, 328is, 328ic
E36 (92-99) > M3 (1995-99)
E46 (99-05) > 320i, 323Ci, 323i, 325Ci, 325i, 325xi, 328Ci, 328i, 330Ci, 330i, 330xi
E46 (99-05) > M3
5 Series
E34 (89-95) > 525i M50
E34 (89-95) > 535i
Z Series
E36/7 / E36/8 Z3 (96-02) > Z3 2.5, Z3 2.8, Z3 3.0
E36/7 / E36/8 Z3 (96-02) > Z3 M - S52
E36/7 / E36/8 Z3 (96-02) > Z3 M - S54
E85 / E86 Z4 (03-08) > Z4 2.5i M54, Z4 3.0i M54
E85 / E86 Z4 (03-08) > Z4 M

Visit Accessories & Electronics to see additional products in this category.

Rally Road Vanos Banjo Oil Supply Fitting

Thu, 8 Aug 2019 12:35:52 GMT

Rally Road Vanos Banjo Oil Supply Fitting
Buy Now: $29.95

The easiest way to supply your turbo or supercharger with oil!

Stainless steel Vanos banjo fitting with -4 male fitting on the end. Replace your current banjo bolt and attach the 4AN oil supply line. No drilling, no pipe threads, no leaks!

Note: Two new 14mm x 20mm copper sealing washers are included with this part.

Visit Accessories & Electronics to see additional products in this category.

Rally Road High Flow Billet Fuel Rail

Thu, 8 Aug 2019 12:31:06 GMT

Rally Road High Flow Billet Fuel Rail
Buy Now: $224.95

Custom billet fuel rail for the BMW with M50 intake manifold. A must have for a high horsepower car or when converting to E85 fuel with larger volume demands.

This fuel rail is machined for -8 AN ORB o-ring fittings on feed and return sides but will accommodate larger or smaller feed and returns with your choice of supplied adapters. You may choose a -10 AN feed fitting and a -6 AN return...or whatever combination you like.

Billet mounts and stainless steel hardware included. Fits OEM body injectors. Some small body injectors like the ID1000 may require a spacer on the bottom of the injector.
Spacers serve 3 purposes.
1. Spacers will keep the injector stable in the rail.
2. Limit the injector from seating too deep in the OEM intake manifold which will create a boost leak.
3. Keep the injector seated in the rail and eliminate the chance of a dangerous fuel leak.

*Fuel rails are only available in bright BLACK anodized. Available with -6 -8 or -10 straight male adapter fittings.

Visit Accessories & Electronics to see additional products in this category.

Rally Road Turbo Oil Feed Line

Thu, 8 Aug 2019 12:10:59 GMT

Rally Road Turbo Oil Feed Line
Buy Now: $26.95

Turbo Oil Feed line specifically made for the M50 series motor with top mount turbo manifold. Bottom mount feed line will be released shortly.

Line is braided stainless outer and Teflon inner. This line has a 4AN 90 degree fittings on each end.

This line works perfectly with our Vanos Banjo Oil Feed Fitting (sold separately).

Made in USA.

Visit Accessories & Electronics to see additional products in this category.

Rally Road Turbo Coolant Line Kit, BMW E36

Thu, 30 May 2019 10:48:46 GMT

Rally Road Turbo Coolant Line Kit, BMW E36
Buy Now: $165.00

Rally Road came up with this high quality turbo coolant lines to replace rubber lines that can become brittle and crack.

Hoses are 6AN braided stainless with crimped aluminum fittings. This line kit will eliminate the coolant lines which circulate hot coolant through the throttle body.

Made in U.S.A.

Fits BMW E36 and E34 with M5X motors.
Note: Must have coolant port in cylinder head for throttle body cooling lines.

Visit Accessories & Electronics to see additional products in this category.

Active Autowerke Water/Methanol Injection Kit, BMW E36/E46

Thu, 10 Jan 2013 11:21:00 GMT

Active Autowerke Water/Methanol Injection Kit, BMW E36/E46
Buy Now: $1,800.00

One of the best inventions for your BMW has already been around 60 years!

Superchargers and turbochargers generate more than just boost, they generate a ton of incremental heat during operation, resulting in ‘heat-soak’ from elevated intake air temps. Their power increase creates its own power decrease...

But an application specific Active Autowerke methanol-water injection system will help chill the intake charge to a cooler temperature – effectively combating the heat soak effect and acting as a 'chemical intercooler'.
Additionally, the methanol-water mix increases your engine’s knock limit, serving as insurance against unwanted high boost detonation. Methanol is a fuel and therefore will not lean out a fuel mixture and is considered very safe.
Water/Methanol systems have been used since WWII to increase power on booted engines, and with today’s electronic controllers it has become a safe and easy to use upgrade for BMWs.

Your chosen mixture of methanol & water, or just one or the other, is precisely delivered and metered by its own electronic module. This module not only monitors the boost pressure within the engine but also controls the delivery flow to match both the engine load and demand as needed. Active has insured this kit works with each BMW application they offer to insure a much faster, cleaner install than universal kits.

Your kit comes with a large 1.8+ gallon reservoir well suited for BMW apps. Each fill up can last weeks to months depending on how much time is spent at full throttle, the capacity is there to meet most demands and the trunk mounted location is ideal by being the furthest position away from both engine and exhaust heat.
This kit installs in a trunk position that maximizes the available trunk space. It has a rigid mount that's very secure, yet it can be easily detached if needed by its spring loaded quick releases.

If there’s one mod you should be considering for better forced induction performance, this is it.

Key Features:

- Trunk-mounted 1.8+ gallon reservoir with inline filter and low pickup tube
- Reservoir location on Battery Tray maximizes trunk storage
- Methanol-water mix is not influenced by either engine or exhaust heat
- Robust high volume pump will deliver on demand and is suited for a methanol-water mix
- Electronic module delivers precisely. Settings can be re-adjusted if needed
- Injection hose and wiring routed within a protective casing
- Not a generic, universal system but manufactured model specific
- Detailed instruction with pictures makes for a simple install
- Tested and proven on our 500+ HP turbo and supercarged cars

NOTE:
Methanol or any liquid is not included with this system. The end user is responsible for procurement

Visit Accessories & Electronics to see additional products in this category.

AEM Water/Methanol Injection Filter

Mon, 19 Sep 2011 15:07:00 GMT

AEM Water/Methanol Injection Filter
Buy Now: $30.95

The AEM Water/Methanol Injection Filter is an in-line filter that uses a micronic mesh screen to filter particulates as small as 40 microns from clogging or damaging pumps, injection nozzle check valves or flow sensors.

This allows a cleaner flow of water/methanol to be passed into the engine, not only protecting the internals of the engine itself, but also the working parts of the water/methanol pump, too.

Run the AEM Water/Methanol Injection Filter in-line before the pump to protect both pump and engine.

The AEM Water/Methanol Injection Filter uses fittings compatible with virtually any water/methanol injection system using ¼” OD tubing

Click Here for Installation Instructions.

Visit Accessories & Electronics to see additional products in this category.