VAC Motorsports - Tuning & Data Acquisition / AiM Sports - Data Acquisition / All Products

AiM Sportline Shift Light Module

Sat, 18 May 2019 12:20:23 GMT

AiM Sportline Shift Light Module
Buy Now: $219.00

The Shift Light Module is a compact array of ten RGB LEDs which helps monitoring RPM thresholds and lap time performances.

It can be helpful when you have a logger but not a dash, or even in case your dash is positioned where you can't easily see its shift lights.

With Race Studio 3 software you can easily set the LED color and the RPM value that turns each LED on/off, also depending on the gear number. It is fully customisable: users can select a solid alarm or flashing one and its flashing frequency.

You can set the Shift Lights Module as a Predictive Lap Timer as well:
the LEDs bar will turn green
if you are improving your chrono
compared to the best one of the
session or will turn
red if you are getting worse.

The Module is CAN compatible with the following systems: EVO4S, EVO5, MXL2, MXG, MXG 1.2, MXG 1.2 Strada, MXP, MXP Strada, MXS, MXS 1.2, MXS 1.2 Strada.

Please note: predictive lap time function is only available for MXG 1.2, MXG 1.2 Strada, MXP, MXP Strada, MXS 1.2 and MXS 1.2 Strada.

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM Sportline MXG Strada 1.2

Sat, 2 Mar 2019 22:17:00 GMT

AiM Sportline MXG Strada 1.2
Buy Now: $1,599.00

A wide range of data sources

MXG 1.2 Strada is a 7" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS08 Module.

Click the icons and learn more:

ECU connection

Analog/digital inputs

Math channels

Second CAN

GPS08 Module

Freely configurable pages

You can define all the custom pages you wish,
choosing among a wide library
of page styles, defining which data
to be shown, their end of scale and measure units.
Swapping between pages can be managed
pushing one or two pushbuttons.

High contrast TFT display

A high contrast TFT display identifies
MXG 1.2 Strada at the first glance.
An ambient light sensor keeps
the backlight at optimum brightness levels.

Flexible alarms & custom street icons

MXG 1.2 Strada features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 – Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customized icons.

Two digital outputs

MXG 1.2 Strada features a LOW SIDE type
(switch to ground) digital output configurable
in order to be activated/deactivated depending
on the value of the analog/digital inputs
or on impulses coming from the ECU.
This permits to automatically run external
systems, i.e. to switch on/off additional
lights, to activate/de-activate a cooling
fan or circulation pumps, etc. when a certain
event happens.

More info

Camera inputs,
also for mirror camera

Two analog camera inputs are available,
to swap your display into a mirror camera,
through pushbutton command
or event management.

More info

Integrated shift light array

Choose from a host of advanced
multicoloured RGB shift light patterns
that can be customized as you like,
and for each unique gear when required.

A modular system

Using the built-in CAN bus you can add expansion modules to visualize additional info:

GPS08 Module
Thanks to GPS08 Module and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique.

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub
It adds 4 K thermocouples.

LCU-One CAN
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

Connection example

These are only some of the items that can be added to our MXG 1.2 Strada for incrementing the performance
and the data acquired:

CAN output

With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities.

Race Studio 3 configuration

MXG 1.2 Strada is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.

AiM LearnFast E-training Series

Check out how to use Race Studio 3 Configuration: Part 1 - Part 2

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM Sportline MXP Race Dash and Data logger

Sat, 2 Mar 2019 21:58:00 GMT

AiM Sportline MXP Race Dash and Data logger
Buy Now: $2,895.00

MXP offers 50% more display area than the 5'' MXS display, in a similar dimension.
The dash logger has an integrated shift array, configurable multicolor alarms, drag and drop multi page configuration, Wi-Fi and USB connectivity, GPS Module, inertial platform, analog and digital inputs, digital outputs, Motorsport connectors, 4 GB of internal memory, 1,000Hz per channel sampling and support for over 1,000 ECU connections.

A wide range of data sources

MXP samples data coming from your ECU, the GPS Module, the 9 axis inertial platform (accelerometer, gyro and magnetometer), 8 fully configurable analog inputs, 6 digital inputs, predefined math channels and second CAN. Performance and data acquired can also be incremented adding up to eight expansion modules.

Click the icons and learn more:

ECU connection

GPS08 Module

Inertial platform

Analog/digital inputs

Math channels

Second CAN

MXP is also available in its STRADA version,
a dash for road use, with similar characteristics but without logging feature.

Freely configurable pages

High contrast TFT display

A high contrast TFT display identifies
MXP at the first glance.
An ambient light sensor keeps
the backlight at optimum brightness levels.

Flexible alarms & custom street icons

MXP features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in “Race Studio 3 – Icons Management” and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn’t be enough, you will be able to upload and set up your own customized icons.

Two digital outputs

MXP features two digital outputs.
The two digital outputs (Dout) are LOW SIDE type
(switch to ground): they can be configured in order
to be turned on/off depending on the value
of the analog or digital inputs.
They permit to automatically run external systems,
i.e. to switch on/off additional lights,
to activate/de-activate a cooling fan
or circulation pumps, etc. when
a certain event happens.

More info

Camera inputs,
also for mirror camera

Two analog camera inputs are available,
to swap your display into a mirror camera,
through pushbutton command
or event management.

More info

Integrated shift light array

Choose from a host of advanced
multicoloured RGB shift light patterns
that can be customized as you like,
and for each unique gear when required.

Expand the system, according to your needs

Using the built-in CAN bus, you can add expansion modules to the MXP to increment the performance and the data acquired:

GPS08 Module
Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique.

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub
It adds 4 K thermocouples.

LCU-One CAN
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

Memory Module
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.

Connection example

These are only some of the items that can be added to our MXP for incrementing the performance and the data acquired:

CAN output

With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities.

Race Studio 3,
the almighty software

Race Studio 3 is the heart of your MXP, managing all your activities related to:

Configuration

With Race Studio 3 you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital outputs, Alarms, Shift Lights and all the expansions you need. You will also be able to manage the map of all your racing tracks and compare two laps watching the video recorded by SmartyCam HD cameras.

AiM LearnFast E-training Series

Check out how to use Race Studio 3 Configuration: Part 1 - Part 2

Analysis

With Race Studio 3 you can also analyse all data recorded by MXP and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

DOWNLOAD RS3

Wi-Fi connectivity

Makes it even more convenient
to configure, calibrate, and download your data
wirelessly, using a secure 802.11 WiFi
connection: no need to move your PC close
to the vehicle anymore, you can do it
from your van up to 50 meters away.

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM Sportline MXG Race Dash and Data logger

Sat, 2 Mar 2019 21:33:00 GMT

AiM Sportline MXG Race Dash and Data logger
Buy Now: $3,299.95

A wide range of data sources

MXG 1.2, the evolution of MXG, is the dashlogger designed to acquire and display data coming from your ECU, the internal accelerometer and gyro, as well as from the GPS08 Module included in the kit, analog/digital inputs and predefined math channels. Performance and data acquired can also be incremented adding up to eight expansion modules. Its 7" display makes it perfect for wide cockpits installation.

ECU connection

Analog/digital inputs

Internal accelerometer and gyro

Math channels

Second CAN

GPS08 Module

CAN output

With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities.

Freely configurable pages

You can define all the custom pages
you wish, choosing among a wide library
of page styles, defining which data
to be shown, their end of scale and measure units.
Swapping between pages can be managed
pushing one or two pushbuttons.

High contrast TFT display

A high contrast TFT display identifies
MXG 1.2 at the first glance.
An ambient light sensor keeps
the backlight at optimum brightness levels.

Flexible alarms

MXG 1.2 features eight configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.

Two digital outputs

MXG 1.2 features two digital outputs.
The two digital outputs (Dout) are LOW SIDE type
(switch to ground): they can be configured in order
to be turned on/off depending on the value
of the analog or digital inputs.
They permit to automatically run external systems,
i.e. to switch on/off additional lights,
to activate/de-activate a cooling fan
or circulation pumps, etc. when
a certain event happens.

More info

Camera inputs,
also for mirror camera

Two analog camera inputs are available,
to swap your display into a mirror camera,
through pushbutton command
or event management.

More info

Integrated shift light array

Choose from a host of advanced
multicoloured RGB shift light patterns
that can be customized as you like,
and for each unique gear when required.

Expand the system, according to your needs

Using the built-in CAN bus, you can add expansion modules to the MXG 1.2 to increment the performance and the data acquired:

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

TC Hub
It adds 4 K thermocouples.

LCU-One CAN
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

Memory Module
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.

Connection example

These are only some of the items that can be added to our MXG 1.2 for incrementing the performance and the data acquired:

Race Studio 3,
the almighty software

Race Studio 3 is the heart of your MXG 1.2, managing all your activities related to:

Configuration

AiM LearnFast E-training Series

Check out how to use Race Studio 3 Configuration: Part 1 - Part 2

Analysis

With Race Studio 3 you can also analyse all data recorded by MXG 1.2 and downloaded to your PC: graphs, histograms and tables will help you study your performance, providing an objective support to avoid mistakes and improve performances.

DOWNLOAD RS3

Wi-Fi connectivity

Visit AiM Sports - Data Acquisition to see additional products in this category.

VAC Motorsports Steel Dash Mount for AIM MXL2

Wed, 3 Feb 2016 06:53:00 GMT

VAC Motorsports Steel Dash Mount for AIM MXL2
Buy Now: $89.95

Make sure your data is always within sight with VAC's new dash mounts, carefully designed to keep your AIM unit where you need it.

Machined in-house from a solid piece of stainless steel, you'll never have to worry about the safety of your MXL2.

** Pictured to show how MXL2 fits, does NOT include the MXL2 unit **

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM SmartyCam 3 Corsa Camera System

Tue, 24 Sep 2013 12:33:00 GMT

AiM SmartyCam 3 Corsa Camera System
Buy Now: $1,598.99

AiM SmartyCam 3 Corsa – Professional Video Data System for Competitive Drivers

The AiM SmartyCam 3 Corsa is a high-performance motorsport camera engineered for serious racers who demand detailed video and data integration to push their performance to the limit. Built for professional-grade analysis, the SmartyCam 3 Corsa combines stunning HD video with real-time telemetry overlay, giving drivers the tools to extract every tenth from their lap.

Designed to integrate seamlessly with AiM’s range of data loggers and ECU connections, the Corsa model offers enhanced data acquisition capabilities, including CAN-based vehicle parameters, advanced sensors, and customizable overlays. The robust, waterproof aluminum body and advanced thermal management system ensure reliability in the most extreme track conditions.

Key Features:

Full HD video (1920x1080) with real-time data overlay
Direct CAN integration for advanced vehicle data logging
Customizable graphics overlays with speed, RPM, throttle, brake, GPS, lap time, and more
Auto start/stop recording based on configurable triggers
Internal 3-axis accelerometer and gyroscope for dynamic analysis
High-quality global shutter CMOS sensor for blur-free images
Built to withstand high vibration, heat, and moisture—perfect for motorsport environments

Whether you’re racing wheel-to-wheel or testing for performance gains, the AiM SmartyCam 3 Corsa delivers unmatched video telemetry precision to support better decision-making, faster lap times, and smarter driving.

Dominate the track with the ultimate data-driven camera.

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM Sportline GPS05 Module

Sat, 5 Jan 2013 06:03:00 GMT

AiM Sportline GPS05 Module
Buy Now: $399.00

GPS technology represents a true revolution in data acquisition. Thanks to GPS05 Module and its GPS Manager software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique.

GPS05 Module is fast in satellite signal acquisition and reliable in adverse situations: it includes in a single unit both receiver and antenna, for immediate installation.

Lightweight and waterproof, GPS05 Module is connectable to AiM loggers via CAN cable.

GPS Manager allows to set track start/finish lines and splits and to download a comprehensive track database.

GPS05 Module connected to AiM loggers delivers many important information, i.e. chassis analysis, track position, etc.

Thanks to GPS05 Module you'll get:

Position
Speed
Cornering in-line and lateral G
Automatic lap times

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM Sportline SOLO 2 GPS Lap Timer

Sat, 5 Jan 2013 05:55:00 GMT

AiM Sportline SOLO 2 GPS Lap Timer
Buy Now: $489.95

Solo 2
the most precise and easy way to get lap times

The new Solo 2 receives the data from two satellites constellations, GPS and Glonass: this is a huge step forward since it is unbelievably faster and more precise than the previous version and the lap times are calculated within a maximum gap not higher than 2/100 sec.

The screen can be backlited in one of the seven available colors:

Find your track easily and quickly

Solo 2 can rely on a database of more than 2,000 tracks all over the world: as soon as it switches on, Solo 2 identifies its position, recognizes the starting line coordinates of the track and starts sampling lap times.

In case the track is not in the database, no problem: Solo 2 realizes it and switches to learning mode, automatically understands the characteristics of the track and gives the lap time anyway.

Configurable RGB LEDs

Even the predictive lap time is much more reliable,
and the configurable RGB LEDs
will give you the time gap compared to the best lap you set as reference.

Race mode selection

Solo 2 can manage two types of races:

Speed races in a closed circuit

Performance tests (0-100 km/h etc.)

In each of these configurations,
Solo 2 gives the proper information
during the test and powerful data
review immediately after each session.

Data recall on screen

At the end of your test,
you can quickly review
all the key information on your display.

Wi-Fi communication
with the PC

Wi-Fi connection: easy, fast, without
connectors nor cables: the best way
to configure your Solo 2, to manage
the track database, to download
the data to your PC.

iPhone connection

Use your iPhone for a quick and comfortable
data analysis, for managing the track
database and even for an On-Line view
of the most important parameters
of your Engine
(in case you have chosen the Solo 2 DL).

Solo 2 DL,
the Solo with ECU connection

More than 1,000 protocols for 1,000+ ECU in the database,
for easily connect your Solo 2 DL to your Engine Control Unit
and get a lot of information with just one cable.
In case your ECU protocol is not in the database, no problem:
an ECU Driver Builder is always available in the Race Studio 3
configuration software, and you will be able to create
your protocol by yourself.

Coil RPM input
Solo 2 DL now features a digital input allowing to log RPM
either from square wave signals (8-50 V signal)
or pulse signals (150-450 V ignition coil trigger – primary circuit).

SmartyCam HD connection

The perfect connection: get all the data from your ECU, merge them with the GPS information and transmit everything to the SmartyCam HD, that will show them in graphical overlay in the video.

Specific bar pads for motocross

Bar pads to fit handle bars
with and without brace
are available for immediate
installation on every kind
of motocross bike.

CLICK HERE FOR MORE INFO

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM SmartyCam 3 GP

Sat, 5 Jan 2013 05:42:00 GMT

AiM SmartyCam 3 GP
Buy Now: $2,199.00

AiM SmartyCam 3 GP – Pro-Grade Motorsport Camera with Remote Bullet Lens

The AiM SmartyCam 3 GP is a professional motorsport video system built for racers who need maximum flexibility, performance, and precision. Designed for demanding racing environments—where space, durability, and data accuracy are critical—the SmartyCam 3 GP pairs a remote bullet camera with a powerful processing unit to deliver crystal-clear HD video overlaid with real-time telemetry data.

Ideal for open-wheel, prototype, motorcycle, and formula racing, this system captures every moment and every metric, integrating directly with AiM data loggers and your vehicle's ECU. Its remote bullet lens makes it easy to mount in tight or optimal viewing angles, while the rugged DVR unit handles the data and overlay processing with industry-leading stability.

Key Features:

Full HD (1920x1080) video with real-time data overlay
Remote bullet camera for versatile, tight-space mounting
Seamless CAN integration with ECUs and AiM data systems
Automatic start/stop based on engine or vehicle motion
Internal accelerometer, gyroscope, and GPS for detailed data capture
Advanced heat and vibration resistance for harsh race conditions
Customizable data overlay: RPM, speed, throttle, brakes, G-force, lap times, and more
Expandable memory with fast file access for quick review and analysis

Built to withstand the intensity of motorsport, the SmartyCam 3 GP is not just a camera—it's a competitive edge. From track days to championship racing, it delivers the visual and data clarity professionals rely on to improve performance and win races.

Engineered for precision. Built to perform. Designed to win.

Visit AiM Sports - Data Acquisition to see additional products in this category.

AiM SmartyCam 3 Sport

Sat, 5 Jan 2013 05:39:00 GMT

AiM SmartyCam 3 Sport
Buy Now: $949.00

The AiM SmartyCam 3 Sport is the ultimate motorsport camera system designed to revolutionize how drivers analyze and improve their on-track performance. Engineered for high-speed environments, this rugged, compact camera integrates seamlessly with AiM data loggers and ECU connections to overlay critical data directly onto crystal-clear HD video.

Whether you're a track day enthusiast, club racer, or professional driver, the SmartyCam 3 Sport provides detailed insight into your driving—recording speed, RPM, gear position, throttle, brake pressure, G-forces, lap times, and more in real time. Its intelligent data overlay system eliminates the need for post-editing, giving you instant feedback to refine your racing line, braking points, and overall driving technique.

Full HD video with configurable data overlay
Real-time integration with AiM loggers and ECUs
Wide-angle lens options for optimal track visibility
Robust, waterproof, and vibration-resistant design
Auto-start/stop recording based on engine or speed triggers
Expandable storage and quick file transfer for fast review

Race smarter with AiM. The SmartyCam 3 Sport isn’t just a camera—it’s a competitive advantage.

Visit AiM Sports - Data Acquisition to see additional products in this category.