VAC Motorsports - Forced Induction / BMW Turbo Kits 600–1500HP Engine Build Packages

VAC Motorsports 900 Series Turbo Build Kit, BMW S68

Mon, 9 Feb 2026 15:27:24 GMT

VAC Motorsports 900 Series Turbo Build Kit, BMW S68
Buy Now: $6,999.95

Building for boost and reliability? The VAC Motorsports 900 Series Turbo Build Kit combines everything you need to prepare your engine block for boost applications at an affordable kit rate.

This kit is ideal for those looking to build a turbo street car or track car, up to 1000 horsepower, and combines some of our most reliable and affordable components.

Kit Includes:

- VAC Motorsports Multi-Layered Steel Head Gasket

- CP-Carrillo Forged Piston Set - Works with Factory Alusil Bores

- CP-Carrillo Piston Pins

- CP-Carrillo Piston Rings

- CP-Carrillo Pin Locks

- SP Components Connecting Rod Set

- ARP Rod Bolt Set

- VAC Motorsports High Performance Main Bearing Set

*** Must supply crank and block codes***

- VAC Motorsports High Performance Rod Bearing Set

- Genuine BMW Main Bolt Set

Have something else in mind?

Custom configurations available by request. Please contact our sales department with inquiries, Sales@VACMotorsports.com

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

BMW 335i 135i N54 Single Turbo Kit – 640–1100 HP

Mon, 4 Aug 2025 11:54:13 GMT

BMW 335i 135i N54 Single Turbo Kit – 640–1100 HP
Buy Now: $5,000.00

*** You will get 2 shipments. One from DOC Race and one from Precision Turbo. We will ship your turbo kit minus turbo within 4 weeks. Your turbo will ship direct from PTE and their lead time varies. Current lead time on PTE is 4 weeks. If you can not wait 4 weeks please do not place an order!

*** Billing and shipping address must match when checking out or orders WILL be canceled.

Stainless steal braided oil drain line now included.

Fits RWD models only. Please do not ask us if we would make a kit for AWD.

Please note you will receive 2 packages. Please do not be alarmed if you do not see your turbo in the box. Your turbo will be shipped to you directly from Precision Turbo and they normally take anywhere from 2-4 weeks to ship. If you would like an accurate lead time please email us.

The DOC Race turbo kit is the ultimate turbo kit for your street machine! They come complete with all necessary hardware to install and is listed below. The kits come with Precision turbos because they are leaders in the industry for offering top performing products that are reliable so you can make good power and not have to service your turbo for years to come. You can choose from your choice of a 5862 up to a 6870 with horsepower ratings from 640hp up to 1100hp (ratings below).

Included is a T4 twin scroll manifold which is the heart of this turbo kit. Our manifold has been redesigned (9/20) to now be a one piece design for ease of installation. It was put to the test by a handful of very high performing race cars before attempting to fit to our test car. With the design it is capable of producing well beyond 1000hp for anyone looking to really push the limits of this platform. To control all of this, boost is regulated by a pair of Turbosmart 40mm wastegates which are mounted down low and out of the way of heat. The wastegates can be accessed easily without taking out any hot exhaust parts. This will come in handy if you ever need to change springs in your wastegates on the dyne or after hard runs.

Boost is fed to the intercooler by a single 2.5" aluminum charge pipe. The downpipe is made of 3" stainless tubing in two pieces which is V-Band and connects to your factory or any aftermarket exhaust that accepts factory gaskets.

5862 GEN2 CEA- 640hp

6062 GEN2 CEA- 750hp

6266 GEN2 CEA- 800hp

6466 GEN2 CEA- 900hp

6766 CEA- 935hp

6870 GEN2 CEA- 1100hp

* Factory fuel injectors will support upwards of 550hp. It is advised to use an aftermarket port injection system when going beyond that level. We suggest an AD-Engineering port injection kit which include additional fuel injectors to support the power level this turbo kit is capable of. This is the system we run on the DOC Race car and is driven daily without any sort of stalling.

* As of 9/20 our kits come with the most updated O2 placement to help with burning out O2 sensors.

Parts list:

Precision Turbo, (2) Turbosmart Comp40 wastegates (comes with 14psi springs), DOC Race Stainless Multi-Piece V-Band Manifold, 3" Stainless Upper Downpipe, 3" Lower Downpipe (connects to factory location exhaust), V-Band Clamps, (2) Stainless Dump Tubes, 2.5" Aluminum Intercooler Charge Pipe, 2.5" Silicone Couplers / Clamps, 4" Shorty Filter, 5/8" Oil Drain Line Hose, Heat shield, T4 Turbo Gasket, (6) OEM Style Doughnut Gaskets, (4) 10x1.25 Studs / Nuts, -4an Oil Feed Line Kit, Coolant Block Offs & Oil Feed Adapter Fitting, CNC Coolant Pipe / Hardware, Coolant Tank Relocation Bracket, Coolant Hose To Waterpump / Hose Clamps, 5/8" Silicone Hose To Coolant Tank / 5/8" Barb Fittings / Hose Clamps, Nuts / Bolts, 10 ft Silicone Vacuum Hose, (3) Vaccuum Tees, DOC Race Turbo Blanket

FAQ:

Does the kit come with a MAC solenoid?

No the kit does not come with a MAC solenoid and is not required for an install. It is only required when you are wanting to change boost settings with a tuning device such as JB4 or Motiv boost box.

Is it required to remove the subframe to install the kit?

It is not required to remove the subframe to install the kit. For our one piece design manifold you will need to lift the motor approximately 2" and install the manifold from up top.

What other things should I plan on purchasing when installing your kit?

As with any build you should think about the supporting mods required for your individual power goals. Supporting intercooler, chargepipe/BOV Combo, Fueling, Clutch, Tuning Software MHD/JB4, established tuner and if you're smart.. fresh brakes, tires and any needed maintenance. The 2 items below are what we suggest you replace as preventative maintenance.

2 x BMW OEM 2 Bolt Exhaust Gaskets - 18307553603
1 x BMW Coolant Pipe O-Ring - 11537545302

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW N63

Mon, 5 Dec 2022 12:30:05 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW N63
Buy Now: $6,419.95

This kit is ideal for those looking to build a turbo street car or track car, up to 1500 horsepower, and combines some of our most heavy duty components available.

Kit Includes:

- VAC Motorsports Cooper Ring Head Gasket by Athena

- CP-Carrillo Forged Piston Set

- CP-Carrillo Piston Pins

- CP-Carrillo Piston Rings

- CP-Carrillo Pin Locks

- VAC Motorsports Flanged Cylinder Sleeves

- VAC Motorsports Pro-Xtreme Forged Connecting Rod Set by Arrow Precision

- ARP Rod Bolt Set

- VAC Motorsports High Performance Main Bearing Set

*** Must supply crank and block codes***

- VAC Motorsports High Performance Rod Bearing Set

- Genuine BMW Main Bolt Set

Have something else in mind?

Custom configurations available by request. Please contact our sales department with inquiries, Sales@VACMotorsports.com

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S63

Mon, 5 Dec 2022 12:00:09 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S63
Buy Now: $7,740.00

This kit is ideal for those looking to build a turbo street car or track car, up to 1500 horsepower, and combines some of our most heavy duty components available.

Kit Includes:

- VAC Motorsports Cooper Ring Head Gasket by Athena

- CP-Carrillo Forged Piston Set

- CP-Carrillo Piston Pins

- CP-Carrillo Piston Rings

- CP-Carrillo Pin Locks

- VAC Motorsports Flanged Cylinder Sleeves

- VAC Motorsports Pro-Xtreme Forged Connecting Rod Set by Arrow Precision

- ARP Rod Bolt Set

- VAC Motorsports High Performance Main Bearing Set

*** Must supply crank and block codes***

- VAC Motorsports High Performance Rod Bearing Set

- Genuine BMW Main Bolt Set

Have something else in mind?

Custom configurations available by request. Please contact our sales department with inquiries, Sales@VACMotorsports.com

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S54

Mon, 5 Dec 2022 08:32:12 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S54
Buy Now: $9,399.95

Looking to push your engine to its absolute limits? The VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit combines everything you need to prepare your engine block for high boost, all-out applications.

This kit is ideal for those looking to build a turbo street car or track car, up to 1500 horsepower, and combines some of our most heavy duty components available.

Kit Includes:

- ARP L19 Material Head Stud Kit

- VAC Motorsports Cooper Ring by Athena

- CP-Carrillo Pro-Xtreme Turbo Forged Piston Set

- Dome Coating
- Skirt Coating

- CP-Carrillo Xtreme Duty Piston Pins

- CP-Carrillo Piston Rings

- CP-Carrillo Pin Locks

- VAC Motorsports Flanged Cylinder Sleeves

- VAC Motorsports Pro-Xtreme Forged Connecting Rod Set by Arrow Precision

- ARP Rod Bolt Set

- VAC Motorsports High Performance Main Bearing Set

- VAC Motorsports High Performance Rod Bearing Set

- VAC Motorsports Pro-Xtreme Harmonic Damper by ATI

- VAC Motorsports High Volume Oil Pump

- ARP Main Stud Kit

Have something else in mind?

Custom configurations available by request. Please contact our sales department with inquiries, Sales@VACMotorsports.com

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S55

Mon, 5 Dec 2022 06:37:58 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S55
Buy Now: ~~$7,859.95~~ $7,849.95

This kit is ideal for those looking to build a turbo street car or track car, up to 1500 horsepower, and combines some of our most heavy duty components available.

This kit includes:

- ARP Head Stud Kit

- VAC Motorsports Multi Layered Steel Head Gasket

- CP-Carrillo Forged Piston Set

- CP-Carrillo Piston Pins

- CP-Carrillo Piston Rings

- CP-Carrillo Pin Locks

- VAC Motorsports Flanged Cylinder Sleeves

- VAC Motorsports Pro-Xtreme Forged Connecting Rod Set by Arrow

- ARP Rod Bolt Set

- VAC Motorsports High Performance Main Bearing Set

- VAC Motorsports High Performance Rod Bearing Set

- VAC Motorsports Crank Seal Guard

- VAC Motorsports 4 Pin Crank Hub

- ATI High Performance Crank Damper

- Genuine BMW Main Bolt Kit

Custom configurations available by request. Please contact our sales department with inquiries, Sales@VACMotorsports.com

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW B58

Thu, 1 Dec 2022 13:38:40 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW B58
Buy Now: $7,995.95

This is not a "parts bundle."
This is a survival kit for B58 engines pushed into territory where stock architecture simply gives up.

The VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit is engineered for builders chasing extreme boost, sustained cylinder pressure, and reliable four-digit horsepower. Every component in this kit was selected to solve the real failure points of high-output B58 engines--block integrity, rotating assembly strength, fastener retention, and thermal control.

Street car. Track car. Drag car.
If your target is up to 1,500 horsepower, this is the foundation you start with.

What This Kit Does

Reinforces the B58 block for extreme boost
Eliminates OEM weak points under high cylinder pressure
Supports massive turbo setups and aggressive fueling strategies
Provides long-term durability for real power--not dyno pulls

What's Included

Bottom-End Strength & Block Integrity

VAC Motorsports Flanged Cylinder Sleeves
Designed to prevent bore distortion and cracking under extreme boost. This is the cornerstone of a true high-horsepower B58 build.
ARP Main Stud Kit
Locks the bottom end together to maintain bearing alignment and crank stability at high RPM and load.

Rotating Assembly - Built to Take Abuse

VAC Motorsports Pro-Xtreme Forged Connecting Rods by Arrow
Engineered for extreme cylinder pressures and sustained high RPM operation.
ARP Rod Bolt Set
Maximum clamp load where failure is not an option.
VAC Motorsports High-Performance Rod Bearing Set
Designed for high oil load, high RPM, and durability in racing environments.

Pistons & Sealing

CP-Carrillo Forged Pistons
Built specifically for extreme turbocharged applications.
Includes:
- Piston dome coating for heat management
- Piston skirt coating for reduced friction and wear
CP-Carrillo Heavy-Duty Wrist Pins
CP-Carrillo Piston Rings
CP-Carrillo Pin Locks
VAC Motorsports Multi-Layer Steel (MLS) Head Gasket
Superior sealing under extreme boost and combustion pressure.
ARP 625+ Custom Age Head Stud Kit
The gold standard for head retention in high-boost engines. Designed to keep the head clamped when others lift.

Vibration & Harmonic Control

ATI High-Performance Crankshaft Damper
Controls torsional vibration at high RPM, protecting the crankshaft and bearings when power levels skyrocket.

Who This Kit Is For

Builders targeting 1,000-1,500 HP
Big-turbo or single-turbo B58 builds
High-boost street cars that still need reliability
Track, drag, or roll-racing applications
Owners who understand that power without durability is just noise

Why VAC Motorsports

This kit isn't theoretical. It's built from components VAC uses in real, high-power engine programs--where failure costs time, money, and reputation. Every part is chosen for compatibility, durability, and proven performance under extreme conditions.

Custom Builds Available

Have a specific power goal, fuel type, or application in mind?
We offer custom configurations to match your exact build requirements.

📩 Contact Sales: Sales@VACMotorsports.com

Built for boost.
Engineered to survive it.

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S52

Thu, 1 Dec 2022 13:06:24 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S52
Buy Now: $7,099.95

This kit is ideal for those looking to build a turbo street car or track car, up to 1500 horsepower, and combines our most heavy duty components available.

Kit Includes:

- ARP 625+ Custom Age Head Stud Kit
- VAC Motorsports Cooper Ring Head Gasket by Athena
- CP-Carrillo Pro-Xtreme Turbo Forged Piston Set

- Dome Coating
- Skirt Coating

- CP-Carrillo Xtreme Duty Piston Pins
- CP-Carrillo Piston Rings
- CP-Carrillo Pin Locks
- VAC Motorsports Pro-Xtreme Forged Connecting Rod Set by Arrow Precision
- ARP Rod Bolt Set
- VAC Motorsports Pro-Xtreme Harmonic Damper by ATI
- VAC Motorsports High Performance Main Bearing Set
- VAC Motorsports High Performance Rod Bearing Set
- VAC Motorsports Competition Oil Pump with Oil Pump Upgrade Kit Installed
- VAC Motorsports Oil Pan Baffle
- ARP Main Stud Kit

Have something else in mind?

Custom configurations available by request. Please contact our sales department with inquiries, Sales@VACMotorsports.com

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S50

Thu, 1 Dec 2022 13:02:59 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S50
Buy Now: $7,099.95

This kit is ideal for those looking to build a turbo street car or track car, up to 1500 horsepower, and combines our most heavy duty components available.

Kit Includes:

- ARP 625+ Custom Age Head Stud Kit
- VAC Motorsports Cooper Ring Head Gasket by Athena
- CP-Carrillo Pro-Xtreme Turbo Forged Piston Set

- Dome Coating
- Skirt Coating

- CP-Carrillo Xtreme Duty Piston Pins
- CP-Carrillo Piston Rings
- CP-Carrillo Pin Locks
- VAC Motorsports Pro-Xtreme Forged Connecting Rod Set by Arrow Precision
- ARP Rod Bolt Set
- VAC Motorsports Pro-Xtreme Harmonic Damper by ATI
- VAC Motorsports High Performance Main Bearing Set
- VAC Motorsports High Performance Rod Bearing Set
- VAC Motorsports Competition Oil Pump with Oil Pump Upgrade Kit Installed
- VAC Motorsports Oil Pan Baffle
- ARP Main Stud Kit

Have something else in mind?

Custom configurations available by request. Please contact our sales department with inquiries, Sales@VACMotorsports.com

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, Toyota B58

Thu, 1 Dec 2022 11:13:17 GMT

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, Toyota B58
Buy Now: $7,999.95

When the goal is four-digit horsepower, the Toyota B58 needs more than bolt-ons--it needs structural reinforcement, forged internals, and absolute control over cylinder pressure.

The VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit is designed for builders pushing the Toyota B58 far beyond OEM limits. This kit addresses the real failure points seen in extreme boost applications: block integrity, rotating assembly strength, head lift, bearing load, and harmonic control.

This is the foundation for serious Supra builds--street, track, drag, or roll-racing--where reliability matters as much as power.

What This Kit Is Built to Do

undefined Support up to 1,500 horsepower
undefined Reinforce the B58 block for extreme boost
undefined Eliminate OEM weak points under sustained cylinder pressure
undefined Handle aggressive turbo, fuel, and RPM strategies
undefined Provide long-term durability--not just dyno numbers

Kit Includes

Block Reinforcement & Bottom-End Security

VAC Motorsports Flanged Cylinder Sleeves
Designed to prevent bore distortion and block failure under extreme boost. Essential for high-horsepower Toyota B58 builds.
ARP Main Stud Kit
Increases bottom-end rigidity and maintains bearing alignment under extreme load and RPM.

Forged Rotating Assembly

VAC Motorsports Pro-Xtreme Forged Connecting Rods by Arrow
Built for extreme cylinder pressures and sustained high-RPM operation.
ARP Rod Bolt Set
Maximum clamp load and reliability in high-stress racing environments.
VAC Motorsports High-Performance Rod Bearing Set
Designed for increased oil load, heat resistance, and durability at elevated power levels.

Pistons, Rings & Sealing

CP-Carrillo Forged Pistons
Engineered specifically for extreme turbocharged Toyota B58 applications.
Features:
- Piston dome coating for heat management
- Piston skirt coating for reduced friction and wear
CP-Carrillo Heavy-Duty Wrist Pins
CP-Carrillo Piston Rings
CP-Carrillo Pin Locks
VAC Motorsports Multi-Layer Steel (MLS) Head Gasket
Superior sealing under high boost and elevated combustion pressures.
ARP 625+ Custom Age Head Stud Kit
Industry-leading head retention to prevent head lift in extreme boost applications.

Harmonic & Vibration Control

ATI High-Performance Crankshaft Damper
Controls torsional vibration at high RPM, protecting the crankshaft and bearings when power levels climb.

Who This Kit Is For

Toyota Supra B58 builds targeting 1,000-1,500 HP
Big-turbo or single-turbo setups
High-boost street cars that still demand durability
Track, drag, or roll-racing applications
Builders who want power that survives repeated abuse

Why VAC Motorsports

This kit is built from components VAC Motorsports uses in real high-output engine programs. Every part is selected for compatibility, strength, and proven performance in extreme conditions--where failures are expensive and unacceptable.

Custom Configurations Available

Have a specific power goal, fuel type, or application in mind?
Custom configurations are available to match your exact build requirements.

📩 Contact Sales: Sales@VACMotorsports.com

Built for boost.
Engineered to survive it.

Visit BMW Turbo Kits 600–1500HP Engine Build Packages to see additional products in this category.

VAC Motorsports - Forced Induction / BMW Turbo Kits 600–1500HP Engine Build Packages

VAC Motorsports 900 Series Turbo Build Kit, BMW S68

BMW 335i 135i N54 Single Turbo Kit – 640–1100 HP

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW N63

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S63

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S54

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S55

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW B58

What This Kit Does

What's Included

Bottom-End Strength & Block Integrity

Rotating Assembly - Built to Take Abuse

Pistons & Sealing

Vibration & Harmonic Control

Who This Kit Is For

Why VAC Motorsports

Custom Builds Available

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S52

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, BMW S50

VAC Motorsports 1500 Series Pro-Xtreme Turbo Build Kit, Toyota B58

What This Kit Is Built to Do

Kit Includes

Block Reinforcement & Bottom-End Security

Forged Rotating Assembly

Pistons, Rings & Sealing

Harmonic & Vibration Control

Who This Kit Is For

Why VAC Motorsports

Custom Configurations Available

BMW 335i 135i N54 Single Turbo Kit – 640–1100 HP