VAC Motorsports - Engine Components / Engine Mounts / All Products

Rally Road Turbo Motor Mount, BMW E46

Thu, 30 May 2019 11:57:15 GMT

Rally Road Turbo Motor Mount, BMW E46
Buy Now: $169.95

Because not every aftermarket turbo motor mount will work with every turbo manifold and turbocharger, Rally Road now offers motor mounts for different turbo configurations.

Using 3D design software and laser scan data from the OEM mounting arms, we can create a motor mount that fits perfect every time.

Rally Road is the first motor mount supplier to provide a smaller diameter rubber mount with the motor mount for added clearance. The extra 20+ millimeters of clearance can be vital in accomodating a proper turbo inlet pipe. See picture for an overlay of the smaller diameter rubber mount and the OEM BMW mount. The smaller rubber mount is not required for all manifold types, but is available where needed.

Offerings will include motor mounts to fit the following manifolds...

Turbonetics
Technique Tuning
SPA
Cartech
Steedspeed (E36 and E46 M3)
Active Autowerke

Motor mounts are constructed from steel and cadmium plated for corrosion resistance and good looks.

Visit Engine Mounts to see additional products in this category.

Rally Road Turbo Motor Mount, BMW E36

Thu, 30 May 2019 11:10:23 GMT

Rally Road Turbo Motor Mount, BMW E36
Buy Now: $134.95

Because not every aftermarket turbo motor mount will work with every turbo manifold and turbocharger, Rally Road now offers two different motor mounts for different turbo configurations.

Using 3D design software and laser scan data from the OEM mounting arms, we can create a motor mount that fits perfect every time.

The lower motor mount works best with low hanging turbo manifolds and easily allows for up to a 3.5" air intake pipe and possibility of routing your charge pipe over the subframe and behind the AC compressor.

The second motor mount works best with higher runner tubo manifolds and allows for a 4"+ turbo intake pipe. NOTE: It will also fit with the Turbonetics/Godspeed cast manifolds, but will not allow for over the subframe pipes.

If you plan to route your charge pipe under the subframe, the higher Style 2 mount is the one to buy as it will give the most intake clearance.

Motor mounts to fit the following manifolds...
Turbonetics
Technique Tuning
SPA
Cartech
Steedspeed (E36 and E46 M3)
Godspeed (Turbonetics look-alike)
Active Autowerke

Motor mounts are constructed from steel and cadmium plated for corrosion resistance and good looks.

Visit Engine Mounts to see additional products in this category.

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW S65

Tue, 24 Dec 2013 08:31:00 GMT

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW S65
Buy Now: ~~$224.95~~ $224.95

When racing, precision control is always crucial.

If you want to prevent torque loss and are tired of missed shifts and failures from soggy stock engine-mounts, then solid mounts are what you need...Like all VAC components, our mounts are beautifully machined from 6061 T6 billet aluminum and ready for the toughest racing environments.

Our kit includes 2 engine mounts and necessary hardware for factory replacement / direct installation into the E9x M3. Mounts will vary slightly from image.

Tech Note:
Like all engine and trans mounts, when upgrading to a stiffer mount, we highly recommend upgrading both at the same time to evenly distribute the engines twisting-force for best reliability.

Fitment Details:

S65 BMW M3 2008, 2009, 2010, 2011, 2012, 2013

Visit Engine Mounts to see additional products in this category.

UUC Polyurethane Engine and Trans Mount Set, BMW E36/E46/Z3/Z4

Wed, 17 Jun 2009 07:29:00 GMT

UUC Polyurethane Engine and Trans Mount Set, BMW E36/E46/Z3/Z4
Buy Now: $239.95

This part is intended for race/track cars and combination street/track cars. Some additional vibration may be experienced.

If you want to prevent torque loss and are tired of missed shifts, soggy engine mounts, and sheared OEM mounts, firmer mounts are what you want.

Hard driving, tracking and big power output can often exploit weaknesses with the E36/E46 chassis mounts- especially the engine and trans mounts.

Made of firm polyurethane, bolt through style, UUC's RACE engine and trans mounts offer a large reduction of unwanted play to the chassis suitable for most racing, yet still absorb a degree of vibration that many of our street customers find acceptable on their heavily modified cars.

Kits feature:

- Tuned durometer urethane construction
- Stainless steel hardware
- Direct-fit design with correct anti-rotation nub ensures hassle-free installation on any 1992-2005 3-series, M3, Z3, and Z4

VAC Tech Tip:

Due to the inherently well balanced nature of the BMW inline-6, excess vibration has not been a common issue for our high performance street customers as this mount set continues to be a popular choice.

It is recommended to pair these with UUC Performance Transmission Mount Sets.

Visit Engine Mounts to see additional products in this category.

AKG Group N Engine and Trans Mount Set, BMW E30 M3

Thu, 14 May 2009 08:14:00 GMT

AKG Group N Engine and Trans Mount Set, BMW E30 M3
Buy Now: ~~$399.95~~ $359.95

You have an E30 M3 and you have not replaced your engine or transmission mounts? Then your engine and transmission mounts are definitely worn out!
Especially if you like to drive it hard or you track your car.

After 20 years, even low mileage cars have tired, oxidized rubber mounts, so, if your are not the type who drives hard or races your E30 M3 and still drive it on the street from time to time, these mounts are just the ticket. AKG's Poly Group N Motor and Trans Mount Set for the S14 is slightly stiffer (10 durometer points) than the BMW Group N rubber mounts. Now in Version-2, these AKG mounts feature their innovative registered interlocking system which makes mounts stiffer with less compromise of comfort, and does not allow for separation of the mount. New quantity manufacturing has brought the cost of this set down as well. The OEM BMW Group N mounts cost a whopping $800+ just for the engine! That makes this complete set of [4] a much better value.

This set offers what is needed by the hard E30 M3 driver: engine and transmission control. Cornering and cresting turns become more predictable, as the heft of the driveline is not changing the moment of inertia during steering. Ever Had problems where your car shifts fine at normal speeds, but becomes difficult under cornering or braking? That is severely worn engine and trans mounts causing misalignment and these firmer mounts fix this! Shifting the transmission becomes a sure-thing, reducing the chance of a miss shift or over-rev. Firm polyurethane and strong construction reduce the risk of a mount breaking and letting the engine tilt into the radiator (this does happen- and it's not pretty, especially on the track). These are simply a must-have for those that track their S14 regularly, what a difference. If you drive your S14 hard, and don't mind additional engine vibration in the cabin, then these are a great upgrade.

Includes:

Complete set of [2] motor mounts (Polyurethane 80A) and [2] trans mounts (Polyurethane 70A) + locking hardware

VAC Tech Tips:
While these mounts are available separately, we highly recommend always replacing the engine and trans mounts together in a set. Not doing so can cause the softer of the mounts to fatigue and fail, and doesn't provide the same level of performance. We highly recommend reinforcing the front subframe for use with strengthened engine mounts.

Visit Engine Mounts to see additional products in this category.

VAC Motorsports Solid Aluminum Engine and Trans Mount Set, BMW E36/E46 Z3/Z4

Fri, 21 Sep 2007 06:11:00 GMT

VAC Motorsports Solid Aluminum Engine and Trans Mount Set, BMW E36/E46 Z3/Z4
Buy Now: ~~$254.95~~ $254.95

If you want to prevent torque loss and are tired of the missed shifts and issues related to soggy, failure-prone mounts; then solid mounts are the solution.

Our E36 / E46 Solid Engine & Transmission Mounts eliminate all flexing and mount failures that can occur due to movement in your drivetrain. Many failures happen because Mounts are not "bolt though type". Our mounts are basically indestructible and have been used on 4-digit horsepower cars for the ultimate in torture test proven reliability. All mounts are beautifully machined from 6061 T6 billet aluminum in house at VAC. Completely QC'ed and ready to install. Fits all 6cyl E46, E36, & Z3/MZ3, etc.

The kit includes:

2 engine mounts
2 transmission mounts
Necessary hardware

What are the benifits of using an adjustable transsmission mount?
We recommend our adjustable transmission mount as it greatly reduces stress on the transmission and allows adjustment for ease of installation/removal.

Can I use these on my Street Car?
These mounts are sold for track use, we don't recommend them for a street car. Extra noise and vibration will be transmitted to the subframe and cabin. This is up to the vehicle owner to determine if they are right for you.

Visit Engine Mounts to see additional products in this category.

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW E46/E36/Z3

Fri, 21 Sep 2007 06:11:00 GMT

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW E46/E36/Z3
Buy Now: ~~$199.95~~ $199.95

When racing, precision control is always crucial.
If you want to prevent torque loss and are tired of missed shifts from soggy stock engine mounts, then solid mounts are what you need.

Like all VAC components, all mounts are beautifully machined from 6061 T6 billet aluminum.
Our kit includes 2 engine mounts and necessary hardware.

Visit Engine Mounts to see additional products in this category.

VAC Motorsports Solid Aluminum Engine Mounts, BMW E30

Fri, 21 Sep 2007 06:10:00 GMT

VAC Motorsports Solid Aluminum Engine Mounts, BMW E30
Buy Now: ~~$169.95~~ $169.95

If you want to prevent torque loss and are tired of missed shifts and soggy engine mounts on the track, then solid mounts are what you need.

All our engine mounts are beautifully machined from 6061-T6 billet aluminum and have years and years of proven field performance.

Complete kit includes:

2 (L & R) engine mounts
Necessary hardware

Visit Engine Mounts to see additional products in this category.

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW E30 M3 S14

Fri, 21 Sep 2007 06:10:00 GMT

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW E30 M3 S14
Buy Now: ~~$189.95~~ $189.95

If you want to prevent torque loss and are frustrated by the missed shifts and sloppy engine mounts of the E30 M3, then solid mounts are what you need at the track. All mounts are beautifully machined from 6061 T6 billet aluminum. The kit includes 2 engine mounts and necessary hardware.

These have been used around the world for many years reliably, with much success on the track however: they are strictly for race use only.

Visit Engine Mounts to see additional products in this category.

VAC Motorsports - Engine Components / Engine Mounts / All Products

Rally Road Turbo Motor Mount, BMW E46

Rally Road Turbo Motor Mount, BMW E36

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW S65

UUC Polyurethane Engine and Trans Mount Set, BMW E36/E46/Z3/Z4

AKG Group N Engine and Trans Mount Set, BMW E30 M3

You have an E30 M3 and you have not replaced your engine or transmission mounts? Then your engine and transmission mounts are definitely worn out!Especially if you like to drive it hard or you track your car.

VAC Motorsports Solid Aluminum Engine and Trans Mount Set, BMW E36/E46 Z3/Z4

If you want to prevent torque loss and are tired of the missed shifts and issues related to soggy, failure-prone mounts; then solid mounts are the solution.

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW E46/E36/Z3

VAC Motorsports Solid Aluminum Engine Mounts, BMW E30

VAC Motorsports Solid Aluminum Engine Mount Kit, BMW E30 M3 S14

You have an E30 M3 and you have not replaced your engine or transmission mounts? Then your engine and transmission mounts are definitely worn out!
Especially if you like to drive it hard or you track your car.