VAC Motorsports - Engine Components / Engine Valves & Components / All Products

Ferrea Lifter Shim Set, BMW S58

Tue, 28 Jul 2026 13:58:34 GMT

Ferrea Lifter Shim Set, BMW S58
Buy Now: $99.99

The Ferrea Racing Lifter Shim Kit is engineered to enhance valvetrain stability in the high-performance BMW S58 engine. Designed to install beneath the factory hydraulic lifters, these precision-ground 1.0mm shims reduce hydraulic lifter travel, helping minimize valve float while improving valve control and throttle response at elevated RPM.

Whether you're building a street-driven M car, a drag racing machine, or a dedicated track vehicle, the Ferrea Lifter Shim Kit delivers the confidence and reliability demanded by high-horsepower S58 builds.

Stop Valve Float Before It Costs You Power

As engine speed increases, hydraulic lifters can become a limiting factor. Excessive lifter travel may contribute to valve float, reducing engine efficiency and potentially causing valve train instability. Ferrea's precision shims optimize lifter preload, helping maintain consistent valve operation under high boost and sustained high-RPM conditions.

The result is improved valvetrain control, sharper throttle response, and greater confidence when pushing your S58 to its limits.

Designed for High-Boost BMW S58 Applications

From upgraded turbochargers and aftermarket camshafts to aggressive ECU calibrations, today's S58 performance builds demand exceptional valvetrain stability. Ferrea's 1.0mm lifter shims provide the additional support needed to maintain accurate valve motion while reducing unwanted lifter movement during extreme engine operation.

Manufactured from premium materials and precision machined to exact tolerances, every shim is built to withstand the demands of modern BMW performance engines.

Features & Benefits

Precision 1.0mm lifter shims for BMW S58 engines
Reduces hydraulic lifter travel
Helps minimize valve float at high RPM
Improves valvetrain stability and valve control
Enhances throttle response
Precision-ground for accurate fitment
Ideal for high-boost, high-RPM, street, drag racing, and road racing applications
Premium Ferrea Racing Components quality

Reinforce your BMW S58 valvetrain with Ferrea's proven lifter shim technology and keep your engine stable, responsive, and ready for every pull.

Part Number: #LP1109
Lifter Shim Thickness: 1.0mm

Visit Engine Valves & Components to see additional products in this category.

Ferrea High Performance Valve Spring Kit, BMW N52

Thu, 23 Jul 2026 07:15:10 GMT

Ferrea High Performance Valve Spring Kit, BMW N52
Buy Now: $1,095.95

Designed for high-performance BMW N52 engines, Ferrea Valve Springs provide superior valve control and reliability in high-RPM applications. Engineered to reduce valve float, prevent spring failure, and maintain consistent power delivery, they are an ideal upgrade for performance street and race builds.

Features

Designed for high-lift and high-RPM applications
Reduces valve float and improves valve stability
Heat-treated for maximum durability and performance
Ideal for performance and racing engines
Trusted by professional engine builders worldwide

A reliable upgrade for N52 enthusiasts looking to improve engine performance and durability.

Visit Engine Valves & Components to see additional products in this category.

Ferrea High Performance Valve Spring Kit, BMW S68

Thu, 23 Jul 2026 07:01:11 GMT

Ferrea High Performance Valve Spring Kit, BMW S68
Buy Now: $1,659.95

The Ferrea valve spring kit for BMW S68 engines is engineered for high-boost, high-RPM applications. With increased seat pressure and improved coil bind clearance, these springs reduce valve float and maintain precise valve control under extreme conditions.

Visit Engine Valves & Components to see additional products in this category.

Ferrea High Performance Valve Spring Kit, BMW S58

Thu, 23 Jul 2026 06:43:16 GMT

Ferrea High Performance Valve Spring Kit, BMW S58
Buy Now: $1,330.00

The Ferrea Single Valve Spring Kit for the BMW S58 is designed to deliver reliable valve control for performance-oriented builds running increased RPM, boost, and upgraded cam profiles. Built with Ferrea's proven materials and precision manufacturing, this kit is an excellent choice for high-performance street and track applications.

Engineered to maintain valvetrain stability under demanding conditions, these single valve springs provide the strength needed to prevent valve float while preserving durability for long-term use.

Key Features:

Designed specifically for BMW S58 engines (2015-2024)
Single valve spring configuration
Improved valve control at high RPM
Suitable for performance street and track builds
Manufactured to Ferrea's high-quality standards

Ideal for S58 builds where consistent performance and reliability are critical.

Visit Engine Valves & Components to see additional products in this category.

Ferrea High Performance Valve Kit, BMW S58, G80/G82/G83/F97/F98

Thu, 23 Jul 2026 06:33:17 GMT

Ferrea High Performance Valve Kit, BMW S58, G80/G82/G83/F97/F98
Buy Now: $1,099.95

Upgrade your S58 engine with Ferrea's valve kit, recognized for their unparalleled reliability and durability in extreme conditions. Crafted with aerospace-grade alloys, including the robust EV8-Z18, these valves undergo a meticulous two-step slow forging process to ensure optimal grain flow and minimize material structure damage.

Maintaining molecular integrity is paramount, achieved through a rigorous 48-hour heat treatment and stress-relieving process. The valves boast avionics-quality hard chrome and a specially applied hard tip for enhanced performance.
With a standard size of 30.1mm for intake and 28.5mm for exhaust, their triple groove design ensures top-notch efficiency.

This kit includes:

12x Intake Valves (OE Sized)
12x Exhaust Valves (OE Sized)

Designed to seamlessly work with factory valve locks, these Ferrea valves elevate your BMW S58 engine's performance to new heights.

Visit Engine Valves & Components to see additional products in this category.

SuperTech High Performance Valve Spring Kit, BMW S68

Mon, 9 Feb 2026 15:15:32 GMT

SuperTech High Performance Valve Spring Kit, BMW S68
Buy Now: $1,499.95

BMW S68 High Performance Beehive Valve Spring Kit by Supertech

Seat Pressure: 83 @ 35.7mm
Open Pressure: 165 @ 10mm
Max Lift: 11.2mm
Coil Bind: 23.00mm
Outer Spring ID: 17.20mm
Retainer: RET-BMN54-TE
Rate: 8.2
Inner Spring ID: 14.20mm
Inner Spring OD: 21.00mm
Outer Spring OD: 24.00mm
Seat Locator: VSI-EC60E
Kit Contents:
(32) Performance Valve Springs
(32) Steel Retainers
(32) Viton Valve Stem Seals
Manufactured from premium Superclean chrome silicon vanadium steel, SuperTech valve springs are designed for high-RPM durability and consistent performance under extreme conditions.

Visit Engine Valves & Components to see additional products in this category.

VAC High Performance Valve Spring Kit, BMW S63/N63

Tue, 13 Jan 2026 12:12:55 GMT

VAC High Performance Valve Spring Kit, BMW S63/N63
Buy Now: $1,299.95

When you're pushing a BMW S63 or N63 beyond factory limits, valve control stops being a detail and starts being survival. This VAC Motorsports High-Performance Valve Spring Kit is engineered to keep your valvetrain stable when RPM climbs, boost rises, and mistakes--like a missed downshift--are no longer theoretical.

Designed, tested, and manufactured in the USA, this kit delivers the added margin of safety serious builds demand, whether you're running mild upgrades or aggressive cam profiles.

Why This Kit Matters

Modern BMW V8s don't fail gracefully at high RPM. Valve float, over-rev events, and unstable valvetrain geometry can turn an expensive build into scrap metal in seconds. These springs and titanium retainers are built to hold the line--cleanly, consistently, and reliably.

This is not about chasing a number on paper. It's about control.

Key Features & Benefits

High-performance dual valve springs engineered for high-RPM stability
Lightweight titanium retainers reduce valvetrain mass
Adds a critical safety margin against over-revving or mis-downshifts
Designed for maximum long-term reliability
Fully compatible with all performance camshafts
Capable of handling both mild and aggressive cam profiles
Shot-peened for stress relief and extended fatigue life
Precision manufactured in the USA

Technical Specifications

Seat Pressure: 83 @ 35.7mm
Open Pressure: 165 @ 10mm
Spring Rate: 8.2
Maximum Valve Lift: 11.2mm
Coil Bind: 23.00mm
Outer Spring OD: 24.00mm
Outer Spring ID: 17.20mm
Inner Spring OD: 21.00mm
Inner Spring ID: 14.20mm
Retainers: Titanium

Ideal For

High-boost S63 and N63 builds
Track-driven or aggressively street-driven cars
Engines running upgraded or aftermarket camshafts
Builders who want reliability without compromise

VAC Engineering Philosophy

VAC Motorsports components are designed for engines that actually get used--hard. This valve spring kit reflects decades of real-world engine building experience, not theory. Every spec here exists to protect your investment when conditions stop being ideal.

If you're already inside the engine, this is the upgrade that quietly saves you thousands later.

Visit Engine Valves & Components to see additional products in this category.

GSC Super Alloy STD Exhaust Valves for the Toyota/BMW B58/S58

Fri, 5 Dec 2025 14:16:50 GMT

GSC Super Alloy STD Exhaust Valves for the Toyota/BMW B58/S58
Buy Now: $479.73

Stem Diameter (mm)	Overall Length (mm)	Head Diameter (mm)
6	100.1	28.5

GSC Power-Division Super Alloy Exhaust Valves for the B58 and S58 Engines are for those running high horsepower, high EGT set ups that need a valve that will last in 2000°F conditions. The Super Alloy Exhaust valves have chrome polished stems to create a smooth, durable finish for added life and better lubricity, especially when paired with the GSC Manganese bronze valve guides. Strength, heat resistance, and performance are engineered into every valve. Under head dish is maximized for weight savings while swirl polished and backcut heads promote better air flow without sacrificing durability.

STD size Head 28.5mm

Visit Engine Valves & Components to see additional products in this category.

GSC Power-Division Valve Spring Kit, BMW S58

Fri, 5 Dec 2025 08:15:27 GMT

GSC Power-Division Valve Spring Kit, BMW S58
Buy Now: $699.95

GSC Power-Division Beehive Valve Spring Kit with Ti Retainer for the BMW S58

101 lbs @ 1.415" install height
221lbs @ 0.982" (11mm Valve Lift)

9000RPM Max

70PSI Max

Check your valve spring install heights:

https://www.power-division.com/valve-spring-install-height-calculator.html

Visit Engine Valves & Components to see additional products in this category.

Supertech High Performance Valve Kit, BMW B58/S58

Mon, 11 Aug 2025 10:07:56 GMT

Supertech High Performance Valve Kit, BMW B58/S58
Buy Now: ~~$1,150.00~~ $1,099.95

Supertech Forged Stainless Steel Valves are precision made to exacting specifications and are suitable for both street performance and full Race vehicles.

Supertech valves have been proven to work great in street vehicles for day to day use where engine buildup and byproducts can harm typical "race valves," yet these valves have proven their worth on max performance all out race engines, surviving lap after lap, race after race, and even multiple seasons without being replaced!

Supertech valves feature:

One piece forged stainless steel design (compared to welded valves which typically fail at weld)
Triple or Single groove stems to go with your application.
Stock and Oversize available
Lightweight engineering: enhances performance and increase valve train component longevity
Low-friction coated to preserve valve guide bore
Enhanced resistance to fatigue from heat and high RPM

Standard Size is 30.1mm Intake, 28.5mm Exhaust

Kit includes:

12x Intake Valves

12x Exhaust Valves

Visit Engine Valves & Components to see additional products in this category.