VAC Motorsports - Air & Fuel Delivery for BMW Performance Builds / High Performance Fuel Filters for BMW Engines

Peterson 400 Series Inline Fuel Filter

Fri, 17 Dec 2021 05:53:06 GMT

Peterson 400 Series Inline Fuel Filter
Buy Now: $249.95

Peterson Fluid Systems 400 Series filters provide the best filtering available for fuel or oil. Features include an anodized billet body and caps for durability and resistance to fluid corrosion; a stainless steel mesh element for corrosion resistance; and a pleated element for high flow.

They are available in -8 thru -20 AN inlet/outlet sizes, as well as a line of accessory end caps to facilitate the use of temperature probes, accessory oiling and fuel return lines. Filter element choices include 45, 60, 75 and 100 micron stainless or 10/20 micron cellulose, with or without bypass.

Visit High Performance Fuel Filters for BMW Engines to see additional products in this category.

Radium Engineering Fuel Filter Elements

Fri, 13 Mar 2020 11:08:09 GMT

Radium Engineering Fuel Filter Elements
Buy Now: $54.95

All replacement elements for the Radium fuel filter use anodized aluminum end caps that are laser engraved for easy identification and use an internal Viton O-ring for compatibility with all fuel types. See the element selection guide below.

Flow Data
The chart belows shows the results of Radium's in-house flow testing of these elements in the Radium fuel filter housing. The pressure drop was found by measuring the inlet and outlet pressures at different flow rates.

SERVICING

Click Here for installation instructions.

Visit High Performance Fuel Filters for BMW Engines to see additional products in this category.

Radium Engineering High Flow Fuel Filters

Fri, 13 Mar 2020 10:55:06 GMT

Radium Engineering High Flow Fuel Filters
Buy Now: $144.95

The Radium Engineering high flow fuel filter has a 3 piece body that is CNC machined from 6061 aluminum and Type-II anodized for maximum corrosion resistance. Both removable end caps feature large -10AN ORB female threaded ports for high flow plumbing. Click Here for available adapter fittings.

The fuel filter comes preassembled with Viton O-ring seals for all fuel types including gasoline, diesel, methanol, ethanol, and alcohol blends such as E85. High fuel pressures < 150psi can safely be used with negligible pressure drop.

The filter features a large 4.2"x1.75" element maximizing flow without sacrificing filtration. The large elements also hold a lot of contaminants without becoming a restriction, resulting in a very long service life.

SELECTION GUIDE
The Radium High Flow Fuel Filter is available with different filtration elements. Each option is discussed below.

The BOSCH fuel filtration specification states:
"Recommended filter quality: nominal rating 5um, minimum 82% capture efficiency according to ISO/TR 19438; dirt particles > 35um are not permissible."
The Radium Engineering 18-0025-05 element (from 20-0220-05 filter) has a capture efficiency of 99.9% at 6 micron.

Find replacement fuel filter elements HERE.

FLOW DATA
The chart belows shows the results of Radium's in-house flow testing of the fuel filters. The pressure drop was found by measuring the inlet and outlet pressures at different flow rates.

MOUNTING OPTIONS
20-0221 1pc Clamp, 60mm, Heat Exchanger
With engine power levels globally increasing, pump heat is fast becoming an issue in fuel systems. This custom extrusion includes cooling fins that help dissipate heat. The conductive 6063 aluminum design directly clamps to the fuel filter body with 2 countersink stainless steel screws. For maximum efficiency, this unit must be mounted in a location where cool air can pass through the cooling fins, such as underneath the vehicle. Four M6x1mm stainless steel screws are included for mounting to the chassis. The unit is bright-dip anodized black with a laser engraved design.

20-0122 2pc Clamp, 60mm, Dual
This 6061 billet aluminum clamp is designed specifically for 2 filters (or 1 filter and 1 Bosch 044 pump). A stainless steel M8 bolt and lock nut is included. This clamp must be mounted to a flat surface. The clamps are bright-dip anodized Radium green with laser engraved logos.

20-0218 2pc Clamp, 60mm, Single
This 6061 billet aluminum 2-piece clamp consists of two halves that grip the filter body. Three stainless steel M5 bolts are used to mount the clamp to the vehicle and two additional screws are used to secure the clamp halves together. The clamp is bright-dip anodized black with a CNC engraved logo.

SERVICING

Click Here for installation instructions.

Visit High Performance Fuel Filters for BMW Engines to see additional products in this category.

Radium Engineering FPR and Fuel Filter Kit, BMW E46 M3

Wed, 11 Mar 2020 13:46:52 GMT

Radium Engineering FPR and Fuel Filter Kit, BMW E46 M3
Buy Now: ~~$319.95~~ $319.95

This fuel pressure regulator (FPR) and fuel filter is a bolt-in kit designed specifically for the 2001-2006 BMW (E46) M3.

The OEM fuel filter is replaced with a high-flow Radium Engineering fuel filter. Depending on the element chosen, the filter can be compatible with all fuel types and/or can be cleaned and reused.

The OEM FPR is replaced with an adjustable high-flow Radium Engineering FPR.

Click Here for installation instructions.

The complete 20-0430-0X kit is shown below. All necessary hardware and adapter fittings are included. Nothing else is required.

Visit High Performance Fuel Filters for BMW Engines to see additional products in this category.

Radium Engineering Fuel Filter Kit, BMW E46 M3

Wed, 11 Mar 2020 13:37:23 GMT

Radium Engineering Fuel Filter Kit, BMW E46 M3
Buy Now: ~~$319.95~~ $319.95

This fuel pressure regulator (FPR) and fuel filter is a bolt-in kit designed specifically for the 2001-2006 BMW (E46) M3 using factory fuel lines.

The OEM fuel filter is replaced with a high-flow Radium Engineering fuel filter. The filter is compatible with all fuel types. For information on Radium Engineering fuel filters, go HERE.

The OEM FPR is replaced with an adjustable high-flow Radium Engineering FPR.

The complete 20-0430-0X kit is shown below. All necessary hardware and adapter fittings are included. Nothing else is required.

Click Here for installation instructions.

Visit High Performance Fuel Filters for BMW Engines to see additional products in this category.

Peterson 600 Series Inline Fuel Filter

Fri, 21 Sep 2007 06:11:00 GMT

Peterson 600 Series Inline Fuel Filter
Buy Now: $171.95

Peterson's 600 series filters provide the best filtering available. Features include anodized billet aluminum body and end caps for durability and resistance to fluid corrosion. Stainless steel mesh screen and a pleated element for high flow.

Tons of flow capacity for even forced induction applications.

Proven in NASCAR Winston Cup, Busch, World of Outlaws and more.

Inline Style
Various Screen densities and connector sizes
Choose from options above.

Visit High Performance Fuel Filters for BMW Engines to see additional products in this category.