Radium Engineering 10AN low profile swivel fittings simply press-in. No drilling or welding required.
FEATURES
-Stainless/Aluminum Construction
-Low Profile 10AN Male Fitting
-Anodized and Laser Engraved
-Swivel Action with Viton O-Rings
-Simple Press-Fit Installation
Refer to the table below for fitment information with popular Toyota engines. If an engine is not listed, then we do not have fitment information for it.
| Press-In Fittings |
| Engine |
Exhaust Side |
Intake Side |
| 2JZ-GTE |
13.5mm |
18.1mm |
| 2JZ-GTE vvti |
13.5mm |
18.1mm |
| 2JZ-GE |
13.5mm |
18.1mm |
| 2JZ-GE vvti |
13.5mm |
Not Compatible |
| 1JZ vvti |
11.8mm |
18.1mm |
| 1JZ non-vvti |
17.5mm |
18.1mm |
13.5mm
The low profile 13.5mm press-fit banjo fitting has a 19.1mm long snout.
This fitting is a direct replacement for the crankcase vent press-in located on the exhaust side valve cover for the following engines:
Toyota 2JZ-GTE VVT-i
Toyota 2JZ-GTE Non VVT-i
Toyota 2JZ-GE VVT-i
Toyota 2JZ-GE Non VVT-i
11.8mm
The low profile 11.8mm press-fit banjo fitting has a 12.0mm long snout.
This fitting is a direct replacement for the crankcase vent press-in located on the exhaust side valve cover for the following engine:
Toyota 1JZ-GTE VVT-i
17.5mm
The low profile 17.5mm press-fit banjo fitting has a 13.6mm long snout.
This fitting is a direct replacement for the crankcase vent press-in located on the exhaust side valve cover for the following engine:
Toyota 1JZ-GTE Non VVT-i
18.1mm
The low profile 18.1mm press-fit banjo fitting has a 9.3mm long snout.
This fitting is a direct replacement for the PCV valve located on the intake side valve cover for the following engines:
Toyota 1JZ-GE VVT-i
Toyota 1JZ-GTE VVT-i
Toyota 1JZ-GTE Non VVT-i
Toyota 2JZ-GTE VVT-i
Toyota 2JZ-GTE Non VVT-i
Toyota 2JZ-GE Non VVT-i
Toyota 2JZ-GE VVT-i (2000-May 2002 ONLY)
Note: 18.1mm will work in many Toyota/Lexus models, some are listed under Additional Applications. If the PCV valve is mounted to the valve cover with OE rubber grommet 90480-18001 (shown below), then this press-in fitting will work.
VAC e-Gift Certificate has been activated!