VAC Motorsports - Brakes / Pedal Assemblies / All Products

Tilton 900 Series 2-Pedal Overhung Pedal Assembly

Fri, 26 Jul 2019 09:50:22 GMT

Tilton 900 Series 2-Pedal Overhung Pedal Assembly
Buy Now: ~~$1,925.00~~ $1,925.00

Tilton’s 900-Series overhung pedal assembly features the latest in pivot-mount master cylinder technology that offers the ultimate in balance bar efficiency, providing exceptional driver feedback and repeatable braking. Pedal assemblies are available in floor-mount, firewall-mount and overhung configurations.

Features:

Pivot-mount master cylinders and fixed “gimbal-type” balance bar virtually eliminates the common problem of brake bias migration through braking zone.
Billet aluminum frame and pedals with adjustable foot pads and anti-slip surface.
Adjustable pedal ratios (4.7:1, 5.5:1, 6.2:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
7/16”-20 balance bar provides maximum rigidity. Integrated angle limit in case of front or rear brake circuit failure. Longer clevis for increased front master cylinder stroke.
Needle bearings utilized at all pedal pivots.
Adjustable clutch pedal stop prevents clutch over-stroking.

Visit Pedal Assemblies to see additional products in this category.

Tilton 900 Series 2-Pedal Firewall Mount Pedal Assembly

Fri, 26 Jul 2019 09:49:02 GMT

Tilton 900 Series 2-Pedal Firewall Mount Pedal Assembly
Buy Now: ~~$1,950.00~~ $1,950.00

Tilton’s 900-Series pedal assemblies feature the latest in pivot-mount master cylinder technology that offers the ultimate in balance bar efficiency, providing exceptional driver feedback and repeatable braking. Pedal assemblies are available in floor-mount, firewall-mount and overhung configurations.

Features:

Pivot-mount master cylinders and fixed “gimbal-type” balance bar virtually eliminates the common problem of brake bias migration through braking zone.
Billet aluminum frame and clutch pedal with adjustable foot pads and anti-slip surface.
Billet steel brake pedal with adjustable foot pads and anti-slip surface (meets NASCAR rules).
Adjustable pedal ratios (4.7:1, 5.5:1, 6.2:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
7/16”-20 balance bar provides maximum rigidity. Integrated angle limit in case of front or rear brake circuit failure. Longer clevis for increased front master cylinder stroke.
Needle bearings utilized at all pedal pivots.
Adjustable clutch pedal stop prevents clutch over-stroking.

Visit Pedal Assemblies to see additional products in this category.

Tilton 900 Series 3-Pedal Floor Mount Pedal Assembly

Fri, 26 Jul 2019 09:46:33 GMT

Tilton 900 Series 3-Pedal Floor Mount Pedal Assembly
Buy Now: ~~$2,650.00~~ $2,650.00

Features:

Pivot-mount master cylinders and fixed “gimbal-type” balance bar virtually eliminates the common problem of brake bias migration through braking zone.
Billet aluminum frame and pedals with adjustable foot pads and anti-slip surface.
Adjustable pedal ratios (4.52:1, 4.65:1, 4.78:1, 4.91:1, 5.32:1, 5.48:1, 5.63:1, 5.80:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
7/16”-20 balance bar provides maximum rigidity. Integrated angle limit in case of front or rear brake circuit failure. Longer clevis for increased front master cylinder stroke.
Adjustable throttle stops limit pedal movement in both directions and adjustable clutch stop prevents clutch over-stroking.

Visit Pedal Assemblies to see additional products in this category.

Tilton 800 Series 2-Pedal Floor Mount Pedal Assembly

Fri, 26 Jul 2019 09:45:04 GMT

Tilton 800 Series 2-Pedal Floor Mount Pedal Assembly
Buy Now: $645.00

Tilton’s 800-Series 2-pedal floor mount pedal assembly merges the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies. Features high-efficiency spherical bearing type balance bar and pivot-mount master cylinder design.

Features:

High-efficiency balance bar and pivot-mount master cylinder design
Forged aluminum pedals with adjustable (vertical & horizontal) foot pads and anti-slip surfaces.
Adjustable pedal ratios (5.29:1, 5.44:1, 5.61:1, 5.75:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
Large diameter 7/16”-20 balance bar provides maximum rigidity. PTFE-coated aluminum clevises for increased durability and reduced friction.
Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.
Lightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.
Adjustable clutch pedal stop prevents clutch over-stroking.

Master Cylinders (sold separately):
Brakes: 78-Series or 79-Series master cylinders
Clutch: 76-Series master cylinders

Visit Pedal Assemblies to see additional products in this category.

Tilton 800 Series 3-Pedal Floor Mount Pedal Assembly

Fri, 26 Jul 2019 09:43:22 GMT

Tilton 800 Series 3-Pedal Floor Mount Pedal Assembly
Buy Now: ~~$825.00~~ $825.00

Tilton’s 800-Series 3-pedal floor mount pedal assembly merges the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies. Features high-efficiency spherical bearing type balance bar and pivot-mount master cylinder design.

Features:

High-efficiency balance bar and pivot-mount master cylinder design
Forged aluminum pedals with adjustable (vertical & horizontal) foot pads and anti-slip surfaces.
Adjustable pedal ratios (5.29:1, 5.44:1, 5.61:1, 5.75:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
Large diameter 7/16”-20 balance bar provides maximum rigidity. PTFE-coated aluminum clevises for increased durability and reduced friction.
Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.
Lightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.
Adjustable clutch pedal stop prevents clutch over-stroking.

Master Cylinders (sold separately):
Brakes: 78-Series or 79-Series master cylinders
Clutch: 76-Series master cylinders

Visit Pedal Assemblies to see additional products in this category.

Tilton 800 Series 2-Pedal Firewall Mount Pedal Assembly

Fri, 26 Jul 2019 06:32:29 GMT

Tilton 800 Series 2-Pedal Firewall Mount Pedal Assembly
Buy Now: ~~$645.00~~ $645.00

Tilton’s 800-Series firewall-mount pedal assembly merges the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies. Features high-efficiency spherical bearing type balance bar and pivot-mount master cylinder design.

Features:

High-efficiency balance bar and pivot-mount master cylinder design
Forged aluminum pedals are engineered for high rigidity and low weight.
Adjustable pedal ratios (5.0:1 – 6.2:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
Foot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences
Large diameter 7/16”-20 balance bar provides maximum rigidity. PTFE coated aluminum clevises for increased durability and reduced friction.
Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.
Lightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.

Master Cylinders (sold separately):
Brakes: 78-Series or 79-Series master cylinders
Clutch: 76-Series master cylinders

Visit Pedal Assemblies to see additional products in this category.

Tilton 800 Series 2-Pedal Overhung Pedal Assembly

Thu, 25 Jul 2019 11:43:15 GMT

Tilton 800 Series 2-Pedal Overhung Pedal Assembly
Buy Now: ~~$645.00~~ $645.00

Tilton’s 800-Series overhung pedal assembly merges the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies. Features high-efficiency spherical bearing type balance bar and pivot-mount master cylinder design.

Features:

High-efficiency balance bar and pivot-mount master cylinder design
Forged aluminum pedals are engineered for high rigidity and low weight.
Adjustable pedal ratios (5.0:1 – 6.2:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
Foot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences
Large diameter 7/16”-20 balance bar provides maximum rigidity. PTFE coated aluminum clevises for increased durability and reduced friction.
Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.
Lightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.

Master Cylinders (sold separately):
Brakes: 78-Series or 79-Series master cylinders
Clutch: 76-Series master cylinders

Visit Pedal Assemblies to see additional products in this category.

Tilton 850 Series 3-Pedal Underfoot Pedal Assembly with Slider System

Thu, 25 Jul 2019 11:38:52 GMT

Tilton 850 Series 3-Pedal Underfoot Pedal Assembly with Slider System
Buy Now: ~~$3,495.00~~ $3,495.00

Tilton’s 850-Series 3-pedal Underfoot Pedal Assembly with Slider System is designed to meet FIA’s fixed seat regulations, enabling the entire pedal box to be adjusted for driver changes during endurance race events. This pedal assembly is also ideal for any racing applications that has different height drivers utilizes the same vehicle, such as racecar rentals or driving school cars.

850-Series pedal assemblies merges the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies. Features a high-efficiency balance bar designed to limit motion to the horizontal plane, reducing friction and brake pressure migration.

Features:

Video Player

00:00

00:03

14-position slider system with 7” of travel enables quick adjustment for driver changes
High-efficiency balance bar and pivot-mount master cylinders design
Forged aluminum pedals engineered for high rigidity and low weight
Adjustable pedal ratio (5.4:1 to 6.9:1) enables the brake pedal to be tuned to driver preference without having to change master cylinder bore size
Foot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences
Lightweight and high-strength aluminum frame
7/16” diameter balance bar provides maximum rigidity. PTFE coated aluminum clevises allow for increased durability and reduced friction
Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction
Includes false floor kit
Throttle linkage kits options for mechanical linkage and Drive-by-Wire systems (sold separately)

Master Cylinders (sold separately):
Brakes: 78-Series or 79-Series master cylinders
Clutch: 78-Series master cylinders

Visit Pedal Assemblies to see additional products in this category.

Tilton 850 Series 3-Pedal Underfoot Pedal Assembly

Thu, 25 Jul 2019 11:12:02 GMT

Tilton 850 Series 3-Pedal Underfoot Pedal Assembly
Buy Now: ~~$1,050.00~~ $1,050.00

Tilton’s 850-Series 3-pedal Underfoot pedal assembly merges the performance of 900-Series pedal assembly technology and the renowned value of 600-Series pedal assemblies. Features a high-efficiency balance bar designed to limit motion to the horizontal plane, reducing friction and brake pressure migration.

Features:

High-efficiency balance bar and pivot-mount master cylinders design
Forged aluminum pedals engineered for high rigidity and low weight
Adjustable pedal ratio (5.4:1 to 6.9:1) enables the brake pedal to be tuned to driver preference without having to change master cylinder bore size
Foot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences
Lightweight and high-strength aluminum frame
7/16” diameter balance bar provides maximum rigidity. PTFE coated aluminum clevises allow for increased durability and reduced friction
Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction
Throttle linkage kits options for mechanical linkage and Drive-by-Wire systems (sold separately)

Master Cylinders (sold separately):
Brakes: 78-Series or 79-Series master cylinders
Clutch: 78-Series master cylinders

Visit Pedal Assemblies to see additional products in this category.

Tilton 850 Series 2-Pedal Underfoot Pedal Assembly with Slider

Thu, 25 Jul 2019 11:04:53 GMT

Tilton 850 Series 2-Pedal Underfoot Pedal Assembly with Slider
Buy Now: ~~$2,465.00~~ $2,465.00

Tilton’s 850-Series 2-pedal Underfoot Pedal Assembly with Slider System is designed to meet FIA’s fixed seat regulations, enabling the entire pedal box to be adjusted for driver changes during endurance race events. This pedal assembly is also ideal for any racing applications that has different height drivers utilizes the same vehicle, such as racecar rentals or driving school cars.

Features:

Video Player

00:00

00:03

14-position slider system with 7” of travel enables quick adjustment for driver changes
High-efficiency balance bar and pivot-mount master cylinders design
Forged aluminum pedals engineered for high rigidity and low weight
Adjustable pedal ratio (5.4:1 to 6.9:1) enables the brake pedal to be tuned to driver preference without having to change master cylinder bore size
Foot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences
Lightweight and high-strength aluminum frame
7/16” diameter balance bar provides maximum rigidity. PTFE coated aluminum clevises allow for increased durability and reduced friction
Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction
Includes false floor kit
Throttle linkage kits options for mechanical linkage and Drive-by-Wire systems (sold separately)

Master Cylinders (sold separately):
Brakes: 78-Series or 79-Series master cylinders
Clutch: 78-Series master cylinders

Visit Pedal Assemblies to see additional products in this category.