VAC Motorsports - Engine Components / Plumbing / Aeroquip / All Products

VAC Motorsports 14mm Male to -3AN Male Fitting

Mon, 15 Mar 2021 05:42:40 GMT

VAC Motorsports 14mm Male to -3AN Male Fitting
Buy Now: ~~$34.95~~ $29.95

Are you looking for to install a Remote Oil Sensor Manifold or additional oil pressure gauges and are having trouble doing so? We designed this fitting to easily thread into any 14mm oil port and allow you to easily attach additional components.

14mm Male to -3AN Male
Made from 6061 Billet Aluminum
Black Anodized Finish for Durability

Visit Plumbing / Aeroquip to see additional products in this category.

VAC Motorsports 14mm Male to -4AN Male Fitting

Mon, 15 Mar 2021 05:39:19 GMT

VAC Motorsports 14mm Male to -4AN Male Fitting
Buy Now: ~~$34.95~~ $29.95

14mm Male to -4AN Male
Made from 6061 Billet Aluminum
Black Anodized Finish for Durability

Visit Plumbing / Aeroquip to see additional products in this category.

VAC Motorsports 12mm Male to -3AN Male Fitting

Mon, 15 Mar 2021 05:34:56 GMT

VAC Motorsports 12mm Male to -3AN Male Fitting
Buy Now: ~~$34.95~~ $29.95

Are you looking for to install a Remote Oil Sensor Manifold or additional oil pressure gauges and are having trouble doing so? We designed this fitting to easily thread into any 12mm oil port and allow you to easily attach additional components.

12mm Male to -3AN Male
Made from 6061 Billet Aluminum
Black Anodized Finish for Durability

Visit Plumbing / Aeroquip to see additional products in this category.

VAC Motorsports Heater Return Elimination Plug, Water Pump End, BMW S54

Wed, 21 Mar 2012 11:50:00 GMT

VAC Motorsports Heater Return Elimination Plug, Water Pump End, BMW S54
Buy Now: $39.95

Our Heater Return Elimination Plug allows you to close the water pump return on the S54. Precise tolerances allow a leak free install and direct replacement for the return hose.

Now includes:

1 O ring 11 53 7 830 712
1 fixing bolt

Visit Plumbing / Aeroquip to see additional products in this category.

VAC Motorsports Oil Line Adapter Plate, BMW S38/M30

Thu, 8 Jul 2010 13:09:00 GMT

VAC Motorsports Oil Line Adapter Plate, BMW S38/M30
Buy Now: $119.95

Directly bolt your stainless braided hoses to your engine block with the VAC Motorsports Oil Line Adapter Plate for S38/M30 engines. Allows use of -10 AN lines, both in and out, of your S38 or M30.
Eliminates the factory oil cooler housing so you can run an inline filter / cooler setup, or a dry sump oil system.

Directly replaces oil filter housing with no mods.

Oil in and out -10 ORB AN fittings (not included)
Ideal for custom oil systems
Laser engraved for easy to understand connections
Anodized for corrosion resistance

Visit Plumbing / Aeroquip to see additional products in this category.

Fragola Series 3000 Hose, Stainless Race

Mon, 8 Sep 2008 07:52:00 GMT

Fragola Series 3000 Hose, Stainless Race
Buy Now: $119.95

Cosmetically, hoses & fittings usually look...the same; however, we can tell you that from maintaining race vehicles for over 20 years, this isn't the case.

Fragola makes a great product at a competitive price. We have used many manufacturers components over the years and have switched to all Fragola fittings and hoses on our vehicles and dry sump kits.

50 years of manufacturing A/N fittings and plumbing has paid off as the amazing quality and reliability of their goods is only made better by such a competitive price!

FPS Series 3000 Race Hose is manufactured to the highest aerospace-quality standard for years of trouble-free service even in the most demanding circumstances.

500-1500 psi. working pressure covers all of the oil, water and fuel systems you may encounter.
Two layers of rugged woven stainless steel.
Inner layer resists collapse and the outer layer protect against abrasion.
Unique CPFE inner liner is compatible with all hydrocarbon and alcohol based fuels, along with synthetic and natural based lubricants.
Operating range of -40 ° F to +300 ° F.
Designed to be used with FPS Series 3000 "billet" swivel Hose Ends.

As a rule of thumb when selecting an A-N hose to replace a given size automotive hose, the dash size is the nominal size in 1/16".
Example: -10, is 10/16" or equivalent 5/8" automotive hose. The A-N hose will be slightly smaller due to the wall thickness of the hose.

Fragola Performance Systems Tech Tip:

On some high vacuum applications Fragola offers a stainless inner support spring as extra insurance against hose collapsing.

Visit Plumbing / Aeroquip to see additional products in this category.

Fragola, Hose Ends, 90° Low-Profile Bend

Fri, 5 Sep 2008 14:16:00 GMT

Fragola, Hose Ends, 90° Low-Profile Bend
Buy Now: $19.95

90 Degree Hose End with Low Profile Bend Tube - Fragola Performance Systems, Series 3000

Cosmetically, hose fittings usually LOOK the same; maintaining race vehicles for over 20 years exposes the truth.
Frogola makes a great product at a competitive price. We have used many manufacturers over the years and have switched to all Fragola fittings on our vehicles and dry sump kits. 50 years of manufacturing A/N fittings has paid off as the amazing quality and reliability of their goods is only made better by a competitive price!

Fittings stocked in classic anodized red/blue color

Please specify size above when ordering

Fragola Performance Systems Series 3000 Hose Ends feature the "cutter" method of hose attachment. The socket draws the hose over the nipple and into the cutter. The seal is formed by the cutter imbedding itself into the end of the hose. If no color is specified, the standard part number is for the regular red and blue. Use these hose ends with our Series 3000 Stainless Race Hose only

Visit Plumbing / Aeroquip to see additional products in this category.

Fragola, Hose Ends, 45° Low-Profile Bend

Fri, 5 Sep 2008 14:16:00 GMT

Fragola, Hose Ends, 45° Low-Profile Bend
Buy Now: $24.95

90 Degree Hose Ends - Bent Tube - Fragola Performance Systems, Series 3000

Fittings stocked in classic anodized red/blue color

Please specify size above when ordering

Visit Plumbing / Aeroquip to see additional products in this category.

Fragola, Hose Ends, 45° Bend

Fri, 5 Sep 2008 13:56:00 GMT

Fragola, Hose Ends, 45° Bend
Buy Now: $19.95

45 Degree Hose Ends - Bent Tube - Fragola Performance Systems, Series 3000

Fittings stocked in classic anodized red/blue color

Please specify size above when ordering

Visit Plumbing / Aeroquip to see additional products in this category.

Fragola, Hose Ends, 60° Bend

Fri, 5 Sep 2008 13:56:00 GMT

Fragola, Hose Ends, 60° Bend
Buy Now: $19.95

60 Degree Hose Ends - Bent Tube - Fragola Performance Systems, Series 3000

Fittings stocked in classic anodized red/blue color

Please specify size above when ordering

Visit Plumbing / Aeroquip to see additional products in this category.