VAC Motorsports - Interior / Steering Wheels, Hubs & Quick Disconnects / All Products

KMP Racing Steering wheel, BMW F80/F82/F87 GT3

Tue, 28 Dec 2021 07:10:02 GMT

KMP Racing Steering wheel, BMW F80/F82/F87 GT3
Buy Now: $2,339.95

KMP has developed a BMW GT3 style racing wheel. This BMW GT3 style wheel makes looking at the dashboard easier. There are 8 buttons with 4 that are free to configure. Due to the use of ergonomic grips the wheel feels very comfortable and it has the perfect shape and grip even with racing gloves.

If an OEM steering wheel is removed, there will be several errors active. The racing wheel has specially developed electronics inside which simulate the OEM wheel with the possibility to take over some original functions such as M1 and M2. Another benefit is the possibility to control the DTC (dynamic traction control) directly from the wheel, instead of the mid-console.

Free to use buttons

A ‘free to use’ button can be used for anything you want. These buttons are switched to ground, and can be used with the supplied flying leads. The flying leads are connected into the back of the slip ring (dashboard side). Connect an external timer, flash light or anything you would like to control directly from your racing wheel. The wiring for each custom function needs to be done by the customer. The plug and play solution makes sure there are no ECU error messages and no airbag light will turn on after installation.

The function names will be laser engraved in the label plates of the steering wheel. If the functions on the ‘Free to use’ switches are already known, please add this as a note to the order. If the function names are not supplied at order, there will not by any engraving at these switch positions.

Button layout

Position	Button	Function
Right Bottom	SW1	FTU
Right Middle	SW2	FTU
Right Middle	SW3	DTC
Right Top	SW4	M1
Left Top	SW5	M2
Left Middle	SW6	HORN
Left Middle	SW7	FTU
Left Bottom	SW8	FTU

Output

The wheel can have different output options. With a fixed spacer, a quick release with curly cable or a quick release with a integrated connector. Standard it will be equipped with a fixed spacer.

Grip

The wheel has two options for the grip. The wheel can be fitted with a rubber or alcantara grip. For racing purposes, a rubber grip is often used.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Racing wheel, Porsche 991 GT3 Style

Tue, 28 Dec 2021 06:45:12 GMT

KMP Racing wheel, Porsche 991 GT3 Style
Buy Now: $2,509.95

KMP has developed a Porsche GT3 style racing wheel. The functionality is the same as the well-known KMP 991 Racing wheel, but with a unique design to have a better view on the dashboard. This Porsche GT3 style wheel makes looking at the dashboard easier. There are 3 buttons who are free to configure. Due to the use of ergonomic grips the wheel feels very comfortable and it has the perfect shape and grip even with racing gloves.

Plug and play

If an OEM steering wheel is removed, there will be several errors active. The racing wheel has specially developed electronics inside which simulate the OEM wheel. The plug and play solution makes sure there are no ECU error messages and no airbag light will turn on after installation.

The Porsche 991/981 GT3 racing wheel is standard equipped with a 44mm spacer. It is possible to replace the spacer with a quick release or quick release with integrated connector at additional costs.

Free to use buttons

Models

There are three different models available (991/981, 991 GT3 and 991 GT3RS)

Grip

The standard version has rubber grips, which is often used for racing purposes. The wheel can be equipped with alcantara grips at additional costs.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

MOMO Steering Wheel Hub Adapter Kit, BMW E28

Thu, 11 Mar 2021 05:09:59 GMT

MOMO Steering Wheel Hub Adapter Kit, BMW E28
Buy Now: $119.00

If you’re looking to upgrade the steering wheel in your E28, this is your ticket

This Steering Wheel Hub Adapter allows removal of your factory steering wheel and installation of your MOMO wheel, and retains both the horn button function as well as proper turn signal auto shut-off.

Suitable for both street and track use

Made in Italy using high grade steel & aluminum. Proven quality for 40+ years. Momo’s hub adapter will fit the most common 6-bolt steering pattern with a bolt spacing of 2.75 inches or 70mm. This includes MOMO, Sparco, OMP, NRG, Isotta and others.

Install Note: Does not fit the similar 6-bolt pattern Nardi / Personal wheels. We offer them else ware in the steering wheel section.
- Hub Adapter,
- Black Rubber Cover
- Counter Sunk Screw Kit
- Hex Key Wrench
- Horn Slip Ring,
- Any horn wires required

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Quick Release Adapter, Professional

Tue, 17 Dec 2019 12:35:36 GMT

KMP Quick Release Adapter, Professional
Buy Now: $459.95

The quick release adapter is used to easily disconnect the steering wheel from the column with using one hand. The steering wheel can be mounted directly on the adapter using six M5 bolts. The mating adapter can be fixed on a steering wheel spacer or hub. The PCD is 70mm, which will fit most common steering wheels. The total height is 46mm, and it has a very low weight of 270 gram.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Steering Wheel Hub, L=114, BMW F8X M3/M4

Tue, 17 Dec 2019 12:27:35 GMT

KMP Steering Wheel Hub, L=114, BMW F8X M3/M4
Buy Now: $259.95

The steering wheel hub for the BMW M2/M3/M4 can be mounted directly on the steering wheel column.

A quick release adapter or Motorsport steering wheel can be mounted using six M5 bolts (PDC 70mm).

The total length of the steering wheel hub is 114mm.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Steering Wheel Spacer, 70mm

Tue, 17 Dec 2019 12:18:30 GMT

KMP Steering Wheel Spacer, 70mm
Buy Now: $169.95

The steering wheel spacer is used to position the racing steering wheel closer to the driver. The steering wheel side has six M5 threads (PCD 70mm), the column side has six 5.2mm holes.

The total length of the steering wheel spacer is 70mm. This steering wheel spacer can be used in combination with most OMP and Sparco racing wheels.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Steering Wheel Hub, L=110, BMW E46

Tue, 17 Dec 2019 12:05:50 GMT

KMP Steering Wheel Hub, L=110, BMW E46
Buy Now: $259.95

The steering wheel hub for the BMW E46 can be mounted directly on the steering wheel column. A quick release adapter or Motorsport steering wheel can be mounted using six M5 bolts (PDC 70mm).

The total length of the steering wheel hub is 110mm.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Quick Release Adapter, Weld-On

Tue, 17 Dec 2019 11:54:02 GMT

KMP Quick Release Adapter, Weld-On
Buy Now: $299.95

The quick release adapter is used to easily disconnect the steering wheel from the column. The steering wheel can be mounted directly on the adapter using six M5 bolts. The mating adapter can be welded on the existing steering wheel column. The weld on boss has an outside diameter of 26mm and inside diameter of 21mm. The Quick release PCD is 70mm, which will fit most common steering wheels.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Racing Wheel, BMW E9X M3, Manual Gearbox

Tue, 17 Dec 2019 07:22:59 GMT

KMP Racing Wheel, BMW E9X M3, Manual Gearbox
Buy Now: $1,364.95

This type is used for BMW E92 with manual transmission. There are no paddles mounted on this type.

The BMW E9x racing wheel is standard equipped with a 44mm spacer. It is possible to replace the spacer with a quick release adapter at additional costs (+€170). Both options will have a curly cable between the steering wheel and the hub. On request, a quick release with integrated connector can be used as well.

Free to use buttons

Different models

The wheel is completely plug and play and therefore easy to install. There are various options for the BMW E90, E92, E92 M3.

	Right bottom	Right top	Left top	Left bottom
01.06.02021	Free to use	Free to use	Horn	Free to use
01.06.02022	Free to use	M-Sport	Free to use	Free to use
01.06.02023	Free to use	M-Sport	Horn	Free to use
01.06.02024	Free to use	Free to use	Free to use	Free to use

The function names will be laser engraved in the steering wheel. If the functions on the ‘Free to use’ switches are already known, please add this as a note to the order. If the function names are not supplied at order, there will not by any engraving at these switch positions.

Custom made layouts are possible on request as well. If an Awron display is used, it will be a custom made layout as well.

Replaces BMW OEM Numbers 32342283738 and 32306795573

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.

KMP Paddleshift Components Kit

Tue, 17 Dec 2019 07:16:52 GMT

KMP Paddleshift Components Kit
Buy Now: $3,489.95

If your ECU has programmable gearshift functionalities, the KMP Paddleshift components kit can be used. The shift control is performed by the ECU, but the high quality components are made by KMP.

Many different setups are possible with all kind of ECU’s and gearbox manufacturers. This kit is used when the ECU has a throttle blip output signal, but still a cable operated throttle body.

This kit contains:

Triple valve block
Compressor
Air buffer
Shift cylinder
Blip cylinder (pedal mounted)
Paddles (L + R)

Please note, mating connectors are not supplied and need to be ordered separate.

Visit Steering Wheels, Hubs & Quick Disconnects to see additional products in this category.