VAC Motorsports - Tuning & Data Acquisition / All Products

AiM SmartyCam 3 Dual

Wed, 23 Jul 2025 09:33:01 GMT

AiM SmartyCam 3 Dual
Buy Now: $3,495.00

AiM SmartyCam 3 Dual – Dual-View Video Data System for Complete Track Insight

The AiM SmartyCam 3 Dual is the pinnacle of motorsport video data systems, delivering synchronized dual-camera recording with real-time data overlay for the most comprehensive on-track analysis available. Designed for professional teams, driver coaches, and advanced track enthusiasts, the SmartyCam 3 Dual offers a complete picture—inside and out.

This cutting-edge system records full HD video from two independent bullet cameras, capturing both driver inputs and track view simultaneously. Integrated seamlessly with AiM data loggers and ECUs via CAN, the system overlays vital performance metrics—such as speed, RPM, gear, throttle, braking, GPS position, G-forces, and lap times—directly onto your video in real time.

Key Features:

Dual full HD 1920x1080 video streams with real-time data overlay
Two remote bullet cameras for flexible mounting (e.g., cockpit + forward view)
Seamless CAN integration with vehicle ECUs and AiM loggers
Internal GPS, accelerometer, and gyroscope for full motion analysis
Auto start/stop recording triggered by speed, RPM, or external inputs
Rugged, lightweight, motorsport-grade DVR unit with high thermal resistance
Expandable storage for extended session recording
Fully customizable graphical overlays with no post-processing needed
Supports 2T SD Card

Whether you're training drivers, reviewing telemetry, or producing professional race footage, the AiM SmartyCam 3 Dual delivers unmatched video and data clarity—allowing you to analyze every movement, decision, and racing line in high definition.

Twice the perspective. Total control. Maximum performance.

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management AltezzaLink ECU, Toyota 3SGE Beams

Tue, 18 Oct 2022 13:36:25 GMT

Link Engine Management AltezzaLink ECU, Toyota 3SGE Beams
Buy Now: $1,595.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed in Compatible Vehicles Tab.

Designed for the 3SGE Beams engine.

- Please check your connector matches the header in the listed photo before purchasing.

- This ECU works for manual transmissions only.

- ECU includes an onboard 4 bar or 7 bar MAP sensor.

- Most factory features are supported.

- Check the features tab for I/O expansion options

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management MR2Link ECU, Toyota 3SGTE 1993+

Tue, 18 Oct 2022 13:19:49 GMT

Link Engine Management MR2Link ECU, Toyota 3SGTE 1993+
Buy Now: $1,425.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed in Compatible Vehicles tab.

Designed for the 3SGTE engine in the models specified in Compatible Vehicles tab.

- Please check your pinoutconnector matches the header in the listed photo before purchasing.

- This ECU works for manual transmissions only.

- ECU does not fit in the original housing of non-turbo cars

- Most factory features are supported.

- Check the features tab for I/O expansion options.

- This ECU will need a modification before E-Throttle is usable.

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management MR2Link ECU, Toyota 3SGTE 1989-1992

Tue, 18 Oct 2022 13:07:07 GMT

Link Engine Management MR2Link ECU, Toyota 3SGTE 1989-1992
Buy Now: $1,425.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed in Vehicle Compatibility tab.

Designed for the 3SGTE engine in the models specified in Vehicle Compatibility tab.

- Please check your connector matches the header in the listed photo before purchasing.

- This ECU works for manual transmissions only.

- A Link Air Temp Sensor is highly recommended with this ECU

- Most factory features are supported.

- Check the features tab for I/O expansion options.

- This ECU will need a modification before E-Throttle is usable.

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management JZXLink, Toyota 1JZ VVTi

Tue, 18 Oct 2022 12:44:30 GMT

Link Engine Management JZXLink, Toyota 1JZ VVTi
Buy Now: $1,845.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

Designed for the 1JZ VVTi engine.

- Please check your connector matches the header in the listed photo before purchasing.
- This ECU works for manual transmissions only.
- ECU includes an onboard 7 bar MAP sensor.
- Most factory features are supported.
- Check the features tab for I/O expansion options

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management JZX90Link ECU, Toyota 1JZ-GTE Non-VVTi

Tue, 18 Oct 2022 10:29:40 GMT

Link Engine Management JZX90Link ECU, Toyota 1JZ-GTE Non-VVTi
Buy Now: $1,735.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car. This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

Designed for the 1JZ-GTE (Non-VVTi) engine.

- Please check your connector matches the header in the listed photo before purchasing.

- This ECU works for manual transmissions only.

- ECU includes an onboard 7 bar MAP sensor.

- Most factory features are supported (Factory traction control not supported, dash light may be illuminated). Check the features tab for I/O expansion options

Note: This Plug-in features a new 4 pin powered CAN connector and cannot use the old CANPCB cable for CAN connection. Use the CANJST4 (Link PN 101-0198) cable for connecting CAN devices. This new 4 pin port and cable provide not only the CAN connection, but also a protected 12V power supply and ground for powering the CAN devices. The power supply is protected by a self-resetting fuse rated at 3A continuous.

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management S15Link ECU, Nissan SR20

Tue, 18 Oct 2022 10:11:38 GMT

Link Engine Management S15Link ECU, Nissan SR20
Buy Now: $1,845.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

Designed for the SR20 engine. This ECU will work with the 64 pin, blue header plug ECU version.

Please check your connector matches the header in the listed photo before purchasing.

This ECU works for manual transmissions only.

ECU includes an onboard 4 bar MAP or 7 bar MAP sensor.

Most factory features are supported.

Check the features tab for I/O expansion options.

This ECU will need a modification before E-Throttle is usable.

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management GTTLink ECU, Nissan RB NEO

Tue, 18 Oct 2022 10:02:39 GMT

Link Engine Management GTTLink ECU, Nissan RB NEO
Buy Now: $1,845.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

The NGTTX is Designed to suit the grey plug RB (typically neo) engine.

- Please check your connector matches the header in the listed photo before purchasing.

- This ECU works for manual transmissions only.

- Most factory features are supported.

- Note: This ECU does not currently output the 4WD signal required for proper 4wd operation in 4WD Stageas and Skylines.

- Note: Models fitted with factory traction control - TCS will no longer function, the TCS and slip lamps will be illuminated.

- Check the features tab for I/O expansion options.

- This ECU will need a modification before E-Throttle is usable.

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management GTRLink ECU, Nissan RB

Tue, 18 Oct 2022 09:52:48 GMT

Link Engine Management GTRLink ECU, Nissan RB
Buy Now: $1,845.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.

This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

The NGTRX is Designed to suit the blue plug Nissan RB engine.

- Please check your connector matches the header in the listed photo before purchasing.

- This ECU works for manual transmissions only.

- This model includes an onboard 4 bar or 7 bar MAP sensor.

- Most factory features are supported.

- Check the features tab for I/O expansion options.

- This ECU will need a modification before E-Throttle is usable.

Visit Tuning & Data Acquisition to see additional products in this category.

Link Engine Management S13Link ECU, Nissan SR20/CA18

Tue, 18 Oct 2022 09:18:36 GMT

Link Engine Management S13Link ECU, Nissan SR20/CA18
Buy Now: $1,845.00

G4X PlugIn ECUs offer the latest in engine management technology, designed to easily maximize the potential from your car.
This ECU fits inside the factory OEM enclosure. Installation is a breeze, with no alteration of the factory wiring loom required for the models listed below.

Designed for the SR20 and CA18 engines, that use the 76 pin Blue ECU Header.

Please check your connector matches the header in the listed photo before purchasing.
This ECU works for manual transmissions only.
It includes an onboard 4 bar or 7 bar MAP sensor.
Most factory features are supported.
Check the features tab for I/O expansion options.
This ECU will need a modification before E-Throttle is usable.

Visit Tuning & Data Acquisition to see additional products in this category.