The Permanent Fix for BMWs "Oil Pump Problem"
Ever have an oil pump sprocket retaining nut back off and lose oil pressure? How about shearing off the oil pump shaft with the sprocket and nut still attached?
While this is rarer on the Euro M3 engine than the M50 family engines, it still
happens. Chances are you will wipe out the engine, requiring a teardown or
rebuild.
We hear this happening to unsuspecting BMW enthusiast who track there Euro
engines and don't believe it can effect them.
This kit is very popular for a reason: it eliminates all failure modes that the
oil pumps see permanently!... while retaining serviceability.
Some people believe it is enough to weld the OEM bolt on, or use a special nut and/or safety wire, however in these cases this does
not solve the shearing of the shaft (completely off!) and in some cases can make things worse. This oil pump issue effects
both 100% stock and modified motors that see high RPM use. Do NOT be the victim this common failure
if you race or track your S50!
VAC Oil Pump Upgrade Kit includes:
- New VAC billet steel oil pump shaft
- Machined oil pump sprocket
- Grade 8.8 retaining hardware designed to fix the problem permanently
Fitment:
-S50B32 Euro
-S50B30 Euro
Install:
Kit install is simple but requires a press.
If you would like, you can also ship your oil pump to us and have our experienced machine shop staff recondition and install your new VAC kit for an additional charge.
You will receive your upgraded oil pump ready to bolt in.
